Page 6 of 8 FirstFirst ... 45678 LastLast
Results 51 to 60 of 71

Thread: lc1 BEN factor for auto ve leaning out afr

  1. #51
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    What fuel are you running...?

  2. #52
    Junior Member
    Join Date
    Sep 2017
    Posts
    31

    Default

    I feel like I need to change the map from (base efficiency numerator 1-lc1 ls1 style factor) to (ben from wb factor). does that sound right?

  3. #53
    Junior Member
    Join Date
    Sep 2017
    Posts
    31

    Default

    e85 always

  4. #54
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    If you run E85, set B3601 to 9.7.

    Also do this:
    - set B3605 col 100 kPa to EQR 1.170, and ramp up to there from the 70 kPa col (use the left-right linear button).
    - set B3618 to EQR 1.17.

  5. #55
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    What cam do you have (int/exh dur +adv)...?

  6. #56
    Junior Member
    Join Date
    Sep 2017
    Posts
    31

    Default

    243/255 .629/.629 113+4

    My 3605 is in lambda and it doesn't look like I can change it through the configure display units. same with my 3618, it's in lambda as well.

  7. #57
    Junior Member
    Join Date
    Sep 2017
    Posts
    31

    Default

    nevermind, I had to restart the tune program

  8. #58
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Here's some files for the scantool, unzip them to their correct folders under c:\user\<you>\Documents\EFILive\V7.5.

    Then in the scantool, open up VDash chart LS1B-0001-m, and open up map B0101-CALC-WO2BEN.

  9. #59
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    I have to drive home from work now, so I'll continue when I get there (about 1 hour).

  10. #60
    Junior Member
    Join Date
    Sep 2017
    Posts
    31

    Default

    did you forget to add the files? I see the chart name is LS1Bxxxxx being a 98 I run the LS1A does that make any difference?

    also did you see post #52, did that make any sense?
    Last edited by 98camaro408; October 6th, 2017 at 02:19 PM.

Page 6 of 8 FirstFirst ... 45678 LastLast

Similar Threads

  1. V8 Scan - Calculated Ben factor
    By Tre-Cool in forum Tutorials
    Replies: 7
    Last Post: September 12th, 2017, 05:34 PM
  2. Replies: 30
    Last Post: April 8th, 2017, 09:59 AM
  3. Ben Factor Question
    By EVI in forum E37, E38 & E67 PFI ECM's
    Replies: 18
    Last Post: March 17th, 2010, 10:01 PM
  4. Auto VE Ben Factor
    By shane in forum Gen IV V8 Specific
    Replies: 2
    Last Post: June 20th, 2008, 10:34 AM
  5. Logging BEN factor with March 20th Beta?
    By Goldfinger911 in forum FlashScan V2 BB Logging
    Replies: 5
    Last Post: March 23rd, 2008, 05:03 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •