Now I noticed that you can't copy a table. For example I used to copy the entire KR table with labels and paste and subtract with labels to B5913. That feature doesn't work anymore. This is basic stuff that should have been thoroughly tested before a release. This just added a substantial amount of time to tuning a vehicle properly.
Last edited by JUSTASBC; March 19th, 2021 at 12:40 PM.
05 Joe Gibbs black RCSB ram air hood, Leer tonneau, blacked out tail and head lights. Forged 370, Eagle crank, Wiseco pistons, Compstar Rods, Pro Flo XT intake, KB Racing log, spool valve, T6 S480 1.32 A/R, boost activated cutout, TSP 2.5 5.3l heads, Comp Cam 224/230 .600 with rockers, comp cams 1.75 roller rockers, dual Walbro 450's, Injector Dynamics id1300's, 4l80e w/3200 multidisk Circle D, trutrac w/3.73's, 3"DI/DO Magnaflow, tips through the roll pan, running COS3 Semi OLSD OS#12592618
Yes, it is basic stuff and yes it was tested. I just tested it again and paste and subtract with labels appears to be working correctly.Originally Posted by JUSTASBC
Is this in the V7 software or the V8 Beta software?
Which exact version of the software are you using?
Can you send me the tune file that you are using and the steps to reproduce the copy/paste problem?
Note: You should log these types of issues via our help desk system so it can be tracked and managed until it is resolved.
https://service.efilive.com/new-ticket
Regards
Paul
Before asking for help, please read this.
I get this.
05 Joe Gibbs black RCSB ram air hood, Leer tonneau, blacked out tail and head lights. Forged 370, Eagle crank, Wiseco pistons, Compstar Rods, Pro Flo XT intake, KB Racing log, spool valve, T6 S480 1.32 A/R, boost activated cutout, TSP 2.5 5.3l heads, Comp Cam 224/230 .600 with rockers, comp cams 1.75 roller rockers, dual Walbro 450's, Injector Dynamics id1300's, 4l80e w/3200 multidisk Circle D, trutrac w/3.73's, 3"DI/DO Magnaflow, tips through the roll pan, running COS3 Semi OLSD OS#12592618
Instead of pasting into EFILive, try pasting the data into Microsoft Excel (or just Notepad). That way you can see what is on the clipboard, like this:
The top left cell MUST have the word LABELS in it - that signifies the data was "copied with labels".
The cell to the right of "LABELS" contains the horizontal axis name (APCYL_DMA), the cell to the right of that contains the data name (KR)
The cell under "LABELS" contains the vertical axis name (RPM).
All other cells are the values in the axis and/or data.
If the data is not formatted like that then you will see that message.
Regards
Paul
Before asking for help, please read this.
OK, looks like I've confused the issue. Your first post was about the V7.5 software, so I assumed the complaints about pasting with labels were also about V7.5
However, After doing some investigation, the error message you posted is actually from the V8 software.
So firstly I need to fix the spelling mistake in that error message (oops) and secondly I need to understand how you are copying/pasting data.
Are you copying from a V7 scan tool map and pasting into the V8 tune editor?
One thing to note about the V8 editor is that it won't allow values that cannot be stored in the ECM. For example most spark tables will only allow an accuracy down to 0.5 degrees. So if you have a cell with 31.5 degrees in it and you perform a "paste and subtract" option that causes 0.1 degrees to be subtracted so that the value becomes 31.4 degrees, then the V8 editor will force that value back to 31.5 degrees because the ECM can only store the values: 30.5, 31.0, 31.5, 32.0 etc. It cannot store any values in between.
See this post for more details:
https://forum.efilive.com/showthread...n-and-Rounding
Regards
Paul
Before asking for help, please read this.
Posting Permissions
Reply With Quote