Is there any way to log MAP values more than 255 kpa in LS1B ?
Car has COS 5 and ZR1 map sensor and making 25 psi of boost so thats exceed tha MAP highest value in the scaner
Is there any way to log MAP values more than 255 kpa in LS1B ?
Car has COS 5 and ZR1 map sensor and making 25 psi of boost so thats exceed tha MAP highest value in the scaner
EFILive Tuner
Wesam, because you are using an EFILive custom OS I think you can select 'GM.MAPBOOST_DMA', this should show you the actual boost figure.
I apologise if I am giving you wrong information because it was a long time ago but that should show you MAP - BARO = GM.MAPBOOST_DMA, so you will end up with actual boost figures between 0 and 255 (which at sea level would be the equivalent MAP value of 100 - 355kPa).
I no longer monitor the forum, please either post your question or create a support ticket.
I'm on COS3 and GM.MAPBOOST_DMA just gave me zeros, for what it's worth.