Page 4 of 5 FirstFirst ... 2345 LastLast
Results 31 to 40 of 42

Thread: Pro Tuning License

  1. #31
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,490

    Default

    Quote Originally Posted by hacklerjason View Post
    How do i code tag a user? "@" doesnt populate a user list?
    Not sure what you mean.... ???
    Before asking for help, please read this.

  2. #32
    Lifetime Member
    Join Date
    May 2016
    Posts
    226

    Default

    Quote Originally Posted by Blacky View Post
    Not sure what you mean.... ???
    In other forums i frequent, i can type "@USERNAME" to tag another member into the thread so they get notified of updates or if i want them to see without sending a link... How do i tag another member in here? The example i would liked to have worked was "@chailand"

  3. #33
    Lifetime Member
    Join Date
    May 2016
    Posts
    226

    Default

    Hey paul
    I confirmed the autocal is on current firmware, ok!
    I confirmed the autocal config files are updated, ok!
    We verified the current installed OS at matching the exact OS we put into "Target OS"
    Any insight?
    please find the requested trace file attached, i will also email
    Attached Files Attached Files

  4. #34
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,490

    Default

    Quote Originally Posted by hacklerjason View Post
    In other forums i frequent, i can type "@USERNAME" to tag another member into the thread so they get notified of updates or if i want them to see without sending a link... How do i tag another member in here? The example i would liked to have worked was "@chailand"
    I don't know the answer to that, try PM'ing Tordne, he's the tech expert for our forum site.
    Regards
    Paul
    Before asking for help, please read this.

  5. #35
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,490

    Default

    Quote Originally Posted by hacklerjason View Post
    Hey paul
    I confirmed the autocal is on current firmware, ok!
    I confirmed the autocal config files are updated, ok!
    We verified the current installed OS at matching the exact OS we put into "Target OS"
    Any insight?
    please find the requested trace file attached, i will also email
    The AutoCal is definitely picking up the ECM as OS=55488112.
    Can you send me the file you are attempting to flash into the ECM? I'll try setting up the same conditions here and see if I can get the same failure.

    Regards
    Paul
    Before asking for help, please read this.

  6. #36
    Lifetime Member
    Join Date
    May 2016
    Posts
    226

    Default

    Quote Originally Posted by Blacky View Post
    The AutoCal is definitely picking up the ECM as OS=55488112.
    Can you send me the file you are attempting to flash into the ECM? I'll try setting up the same conditions here and see if I can get the same failure.

    Regards
    Paul
    Yea that's strange.... The file summary shows the os to be 55508116. I'm getting the files sent over... Will arrive shortly




    Sent from my XT1710-02 using Tapatalk

  7. #37
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,490

    Default

    Quote Originally Posted by hacklerjason View Post
    Yea that's strange.... The file summary shows the os to be 55508116. I'm getting the files sent over... Will arrive shortly

    Sent from my XT1710-02 using Tapatalk
    Best way to determine what OS is in the ECM is to get the AutoCal customer to perform a "Record Diags" which will save all the diagnostic info about the ECM (and TCM if it is available) into a text file on the AutoCal. Get the customer to send that file and it will show you the OS number in the ECM.

    i.e. The start of the file looks like this:
    Code:
    [INFO]
    DATE=FEB, 20 2017
    TIME=11:20:04
    
    [ECM INFO]
    VIN=E39W7AFG0H1xxxxxx
    OS=22637084  <-------------------this is the current OS as reported by the ECM
    Serial=86K190xxxxxx
    Calibration ID=N/A
    Stream=E38
    
    [ECM CVN]
    22637084=A55D
    12635474=2657
    12637167=A6A3
    12625892=36F2
    12633822=25C0
    12635030=9AF1
    12634070=180A
    12635478=4F68
    
    [ECM Monitor Status (Since DTCs were cleared)]
    MIL=OFF
    DTC_CNT=0
    MIS_SUP=YES
    FUEL_SUP=YES
    
    etc...
    Regards
    Paul
    Before asking for help, please read this.

  8. #38
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,490

    Default

    I don't have the file yet, but I think what has happened is this: The two operating systems: 55488112 and 55508116 are compatible with each other. It appears as though the file you have was read from the ECM when it had 55508116 in it. Then the ECM was updated to 55488112 (maybe by the dealer as part of a scheduled service?). So to override that OS you need to put 55488112 in the Target OS.

    Regards
    Paul
    Before asking for help, please read this.

  9. #39
    Lifetime Member
    Join Date
    May 2016
    Posts
    226

    Default

    Quote Originally Posted by Blacky View Post
    I don't have the file yet, but I think what has happened is this: The two operating systems: 55488112 and 55508116 are compatible with each other. It appears as though the file you have was read from the ECM when it had 55508116 in it. Then the ECM was updated to 55488112 (maybe by the dealer as part of a scheduled service?). So to override that OS you need to put 55488112 in the Target OS.

    Regards
    Paul
    That's the path we're on currently.. it does appear as if that's what happened. The read from the ecm does not match the os we have on stock read out. We're doing a too to bottom revalidation of the data within the files and will report back

    Sent from my XT1710-02 using Tapatalk

  10. #40
    Lifetime Member
    Join Date
    May 2016
    Posts
    226

    Default

    Hey Paul, you were right! That's exactly what happened... Got different software sometime after original read... Took a new read and sure enough we got everything lined up. Thanks for the insight!

    Sent from my LG-H918 using Tapatalk
    Last edited by hacklerjason; February 15th, 2018 at 04:53 PM.

Page 4 of 5 FirstFirst ... 2345 LastLast

Similar Threads

  1. Pro Tuning
    By Road in forum FlashScan V2
    Replies: 5
    Last Post: December 16th, 2015, 09:20 AM
  2. Microsoft Surface Pro
    By WisconsinHick1 in forum Lounge
    Replies: 10
    Last Post: July 24th, 2015, 10:53 PM
  3. Pro Tuning license
    By DURAtotheMAX in forum FlashScan V2
    Replies: 41
    Last Post: February 1st, 2015, 06:03 PM
  4. Why do a lot of Pro Tuners turn the P1336 enabler off?
    By onfire in forum General (Petrol, Gas, Ethanol)
    Replies: 5
    Last Post: March 10th, 2007, 11:59 AM
  5. Tuning license
    By RPO_Z06 in forum Purchase and Shipping
    Replies: 4
    Last Post: January 14th, 2006, 04:33 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •