Update: Nov 21, 2013

[samh_08]

Not sure where to put this. When scanning a T43 controller, shift time error shows up as n/a and has no data. Actual shift time seems to work fine. I know you guys love this controller already, so heres another challenge

[joecar]

Not sure where to put this. When scanning a T43 controller, shift time error shows up as n/a and has no data. Actual shift time seems to work fine. I know you guys love this controller already, so heres another challenge

Where does it show up as n/a: V7 scantool, V8 scantool, V2 BBL...?

[samh_08]

Where does it show up as n/a: V7 scantool, V8 scantool, V2 BBL...?

Everywhere. As Im scanning in BBL, and in the exported log in V7. I assumed the V8 scantool wasnt functional so I havent tested that..

[minytrker]

On LS1B PCM's I keep getting invalid serial error please reset the controller or V2. It doesn't do it every flash but the last 3 LS1B pcm vehicles I tuned all gave me that error multiple times. Does it with V7.5 & 8

[samh_08]

I just confirmed that shift error also does NOT work with the V8 scanner either. So it seems to be a logging issue.

Please keep me posted.

[Blacky]

I just confirmed that shift error also does NOT work with the V8 scanner either. So it seems to be a logging issue.

Please keep me posted.

Can you please log the fault here: http://support.efilive.com/kb_articl...7778-QEKN-0400
Include one of the log files.

Regards
Paul

[Blacky]

On LS1B PCM's I keep getting invalid serial error please reset the controller or V2. It doesn't do it every flash but the last 3 LS1B pcm vehicles I tuned all gave me that error multiple times. Does it with V7.5 & 8

Please report the fault here: http://support.efilive.com/kb_articl...7778-QEKN-0400
Include the V7 *.blx trace files and/or the V8 *.htx trace files.

Regards
Paul

[joecar]

Paul,

I seem to be running into "Invalid Windows Handle" when exiting the V7 tunetool:

[Blacky]

Paul,

I seem to be running into "Invalid Windows Handle" when exiting the V7 tunetool:

Is it repeatable, consistently? If so what steps could I try to reproduce it?
Regards
Paul

[joecar]

Is it repeatable, consistently? If so what steps could I try to reproduce it?
Regards
Paul

In Win7 or Win8 open two or more instances of tunetool, and then at any time close any instance (click on window X control button in upper right of window)