PDA

View Full Version : mafless/pcm



zrx1200
January 25th, 2005, 09:34 AM
when my car was mafless tuned with edit.the tuner changed the computer.while he was tuning with each flash he enterd a vin not mine i dont think.till he was finished.at wich time he entered mine using a diferent cable from under the dash..can i expect any probs when my flashscan arrives.. car is vu ute a4..

GMPX
January 25th, 2005, 11:10 AM
If it was tuned with Edit there should be no problems.
Not sure what was going on with the VIN.

Cheers,
Ross

Delco
January 25th, 2005, 12:48 PM
If it was tuned with Edit there should be no problems.
Not sure what was going on with the VIN.

Cheers,
Ross

The PCM came out of a different car , final part of the tune is to get all the values in the PCM to line up with your vehicle.

You will need to get your PCM back to your tuner as all mafless tunes are locked so flashscan will not read it without the pcm being put back to std.

you may ( or will find ) it was not tuned with edit but with flashscan - just a early beta version of flashscan