2 LC1's via serial link?

[Neptune]

Hi All,

Is it possible to hook up two LC1's via the serial input?
The wiring solution is nicer than trying to use the analogs.

Cheers

[joecar]

Yes... V2 BBL has two sets of serial pids.

[Neptune]

Thats great.

Is there a diagram as to how to wire two serials up. One is obviously fairly easy, but the stock serial cable only has one input jack.

Cheers

[joecar]

Plug in the serial terminator jack/plug into SERIAL IN on WB #2.
Connect SERIAL OUT on WB #2 to SERIAL IN on WB #1.
Connect SERIAL OUT on WB #1 to the DB9 null-modem-gender-bender.
Connect the gender-bender to FlashScan V2 RJ12 input.

[or you can make your own DB9->RJ12 null-modem cable.]

See these links:
showthread.php?t=7532 (http://forum.efilive.com/showthread.php?t=7532)
showthread.php?t=8115 (http://forum.efilive.com/showthread.php?t=8115)
http://www.sfcable.com/cable/p/30D1-C1-S.html

[Neptune]

That would make sense :grin:

Thanks for your help!