New Tuning Tutorial: WeathermanShawn

Quote:

---

Originally Posted by mr.prick

This map does not have matching labels, this is why you can't paste w/labels.

---

I thought "matching values" meant that the LTFTBEN table had to have the same row numeration as B5001 - which it does. Do you mean to say that since the data begins on the 8th row, that copy with labels won't carry over the first 7 blank rows - and so the table is misaligned, and doesn't have "matching values"?

And here's a shot of the column set up, as that has been questioned ...

RevGTO, the column heading should say "Value" with an uppercase "V", same as table B5001 (your pic shows "value").

Shawn, thanks for the kind words... :cheers:

I hope I did learn something 30 years ago and not just warm the bench at school... :doh2:

Quote:

---

Originally Posted by joecar

The differences between the new ones and the original ones:
- VE[%]: the new one is about 1% less than the original.
- VE[VE]: the new one is about 18% less than the original (and matches my existing B0101).

---

My math is maybe not so good, which would explain the difference :doh2:
Paul

Quote:

---

Originally Posted by joecar

RevGTO, the column heading should say "Value" with an uppercase "V", same as table B5001 (your pic shows "value").

---

Ok, thanks. It's shown in lower case in the Tutorial, so if that's erroneous, correction needed there.

Quote:

---

Originally Posted by RevGTO

Ok, thanks. It's shown in lower case in the Tutorial, so if that's erroneous, correction needed there.

---

Thanks. Noted. The tutorial will be updated.

Thanks everybody for the feedback.

I will try to post up a list of Tutorial Typos, updates, etc..

It is always smarter to get them all corrected in one big update, but we realize people are using the Tutorial in its current form.

Other than the necessary 'computer work', has this method of tuning made tuning easier or simpler? Any feedback on the actual tuning method itself?

Thanks..

Once you setup the maps it's pretty simple, one log gives pretty good results (with filtered out throttle transients, as said in the tutorial).

Quote:

---

Originally Posted by joecar

RevGTO, the column heading should say "Value" with an uppercase "V", same as table B5001 (your pic shows "value").

---

Explains why I couldnt multiply with labels. Thanks. I'll try the new formula in the next two days.

So far these are the Typographical errors noted with the Tutorial, or where clarification is needed.

If anybody notes any others, please post them up.

Thanks..

***Tuning Tutorial Changes:***

Page 2: Update calc_pids.txt
Provide Link to Text Thread?

Page 6: Line 10. Last word value, should read Value.

Page 7: Change Filter to Read SAE.ECT.C less than or equal to 80C