Wow, I guess I remember seeing it on the V2 from my serial days when I was running a lc1 . I would have chased that forever. Thanks man!!! I will select those pids and do a log and see what happens. Appreciate you as always! !!
Printable View
Wow, I guess I remember seeing it on the V2 from my serial days when I was running a lc1 . I would have chased that forever. Thanks man!!! I will select those pids and do a log and see what happens. Appreciate you as always! !!
Error report generated by EFILive at 05:34:22 on Oct 29, 2016
Error code: ERR_CONFIG/92
C:\Users\st0114\Documents\EFILive\V7.5\User Configuration\calc_pids.txt(14): Units LAM not found. .
EFILive Version: 7.5.8 (Build 311)
Platform: Windows NT
Version: 6.1 (build 7601)
Processor type: Pentium 1648MHz
Directories
Temporary Cache: C:\Users\st0114\Documents\EFILive\V7.5\Temporary cache
Logged Data: C:\Users\st0114\Documents\EFILive\V7.5\Logged data
Customers: C:\Users\st0114\Documents\EFILive\V7.5\Customers
Configuration: C:\Program Files (x86)\EFILive\V7.5\Configuration
Exported Data: C:\Users\st0114\Documents\EFILive\V7.5\Exported data
Images: C:\Users\st0114\Documents\EFILive\V7.5\Images
Sounds: C:\Users\st0114\Documents\EFILive\V7.5\Sounds
Maps: C:\Users\st0114\Documents\EFILive\V7.5\Maps
Pids: C:\Users\st0114\Documents\EFILive\V7.5\PIDs
Virtual Dash: C:\Users\st0114\Documents\EFILive\V7.5\VDash
Print Reports: C:\Users\st0114\Documents\EFILive\V7.5\Print reports
Bug Reports: C:\Users\st0114\Documents\EFILive\V7.5\Bug reports
Connected: No
Auto connect: No
Scan OBDII info: No
Error retries: 1
Retry delay: 10
Message throttle: 0
Most recently used VIN: 1GTEC14V5YZxxxxxx (Note: 1)
PCM information
Unknown: Unknown
Unknown: Unknown
Unknown: Unknown
Unknown: Unknown
Unknown: Unknown
Unknown: Unknown
Unknown: Unknown
Unknown: Unknown
Unknown: Unknown
Unknown: Unknown
Unknown: Unknown
Unknown: Unknown
Stream-Slow scan mode: Unknown
Stream-Fast scan mode: Unknown
Maximum dynamic packets: Unknown
Most recent communication with vehicle:
Report ID: 138081 (Note: 2)
Notes:
(1) The VIN sequence number is not required for this report and for your privacy it is NOT included in this report.
(2)The report ID is a checksum of the report text and is used to verify the integrity of the report.
I uninstalled and reinstalled the sept. beta release of 7.5 and 8 . I changed the user config calc_pids to
# ================================================== ============================
# File details
# ------------
#
# This section defines various details about the file format.
*FILE
#Parameter Value Description
#---------- ---------------- ---------------------------------------------------
VERSION 7.1.1 File version
DECSEP . Decimal separator used in this file
# calc_pids AEM 30-4900
# ================================================== ============================
# Units
# -------------------
# See sae_generic.txt for more information on the *UNITS section
*UNITS
#Code System Abbr Description
#-------- ---------- -------- -------------------------------------------------------------
None None "" "No units"
LAM None "LAM" "Lambda"
EQR None "EQR" "Equivalence Ratio (1/Lambda)"
BEN None "BEN" "BEN factor"
# ================================================== ============================
# Add slot definitions here
# --------------------------------
# See sae_generic.txt for more information on "SLOT" formats
#
#Units Low High Fmt Expression
#------------ ------------- ------------- ---- --------------------------------------------------------------
*CLC-00-030AF
8.0 18.0 .2 "{EXT.AD1}*2+10"
LAM 0.5 1.5 .3 "{CALC.AEM1.AFR}/14.638"
EQR 0.5 1.5 .3 "1/{CALC.AEM1.LAM}"
BEN 0.5 1.5 .3 "{CALC.AEM1.LAM}*{GM.EQIVRATIO}"
# ================================================== ============================
*PRN - Parameter Reference Numbers
# --------------------------------
# See sae_generic.txt for more information on the *PRN section
#
#Code PRN SLOT Units System Description
#------------------------- ---- ------------ ---------------- ---------------- ------------------------------------------
CALC.AEM1 F030 CLC-00-030 "AFR,LAM,EQR,BEN" Wideband "AEM 30-4900 AFR,LAM,EQR,BEN"
# leave at least 2 blank lines below this one (i.e. before end of file)
Then I got this error code !
Error code: ERR_CONFIG/92
C:\Users\Owner\Documents\EFILive\V7.5\User Configuration\calc_pids.txt(40): Units 8.0 not found. .
Your CLC-00-030 ^ is misformed...Quote:
*CLC-00-030AF
8.0 18.0 .2 "{EXT.AD1}*2+10"
LAM 0.5 1.5 .3 "{CALC.AEM1.AFR}/14.638"
EQR 0.5 1.5 .3 "1/{CALC.AEM1.LAM}"
BEN 0.5 1.5 .3 "{CALC.AEM1.LAM}*{GM.EQIVRATIO}"
It should read like this:
Code:*CLC-00-030
AFR 8.0 18.0 .2 "{EXT.AD1}*2+10"
LAM 0.5 1.5 .3 "{CALC.AEM1.AFR}/14.638"
EQR 0.5 1.5 .3 "1/{CALC.AEM1.LAM}"
BEN 0.5 1.5 .3 "{CALC.AEM1.LAM}*{GM.EQIVRATIO}"
I edited the calc_pids.txt for the AEM 30-4900, see attached.
Thanks!!!
I mention the above because I used the latter one and my gauge and scan tool read almost a point off now.
Which AEM do you have...?
Does your user manual show and equation relating V and AFR...?
Or a table of voltages and AFR...?
Thank you Joe. Things have been busy lately, so haven't had time to test yet. I got an understanding of how the calculation's work after following https://forum.efilive.com/showthread...g-autove-wrong
Hopefully I will be able to do some testing next weekend.
Sent from my iPhone using Tapatalk