Same here, just thought Id post it so anyone can make it work the first time. Used it first on b7000 too now onto b7100, didnt bother to make V8 beta work on W7 as I was using Vista as my test OS to keep a backup copy of V8 guaranteed to work.
Printable View
Is this going to replace V7.5 completely soon ?
Hello,
I'm trying to set up my pids with the new software and I get this....see attached.
I must be missing something somewhere.
Can anyone point me in the right direction, everything else seems fine.
Thanks,
Brad
It means that the PCM you are using does not support that particular PID.
In the short term, you need to remove the PID from the list of selected PIDs in the BBL setup software and re-program the FlashScan with the new PID selection.
In the long term... it is a DMA PID which is supported/unsupported depending on the operating system number of the PCM. It may be that we have not added support for that PID for the particular operating system of your PCM.
Can you send the OS number of your PCM? Use the FlashScan device, menu option: F2->F2->F1 to get the operating system number.
Regards
Paul
So some of the PIDs are not supported for BBL right now?
In the Flashscan Menu Items section, I can only see LS1, LS2, LB7 and LMM options (all "sample"). I am looking for the LBZ,AL6 PID list. How do I get this, or is this not possible on this release?
Paul has set BBL up now to be 100% user defined, as in you need to open up S&T then add the proper vehicle (in your case LBZ and AL6). Once you have that setup, click on it then add PIDs to the lower left pane!
In the blue section, right click an Unused row and select Properties. In that Properties screen you can select which controller you want to configure. You can delete/overwrite the sample ones if you want.
Each item that you set up in the blue section, corresponds to an item in FlashScan's/AutoCal's PID selection menu.
Remember to use the [Program] button to program the changes back into FlashScan/AuotCal.
Regards
Paul
dinorex, for example, look at post #210: showthread.php?p=94515#post94515
Paul, is there a way to set the non-custom precision...?