I believe the table data on B7002 could be wrong. It has a nasty spike in 2 cells or so. B7008 just tells the ECM when to start predicting what boost will do and be prepared to step in and make...
Type: Posts; User: a78turbo; Keyword(s):
I believe the table data on B7002 could be wrong. It has a nasty spike in 2 cells or so. B7008 just tells the ECM when to start predicting what boost will do and be prepared to step in and make...
I just verified that the VIN matches the "Cruze Stock Tune_0001.ctz" that you posted above, but I made some changes based on what I have in my tunes. Maybe you need to recheck the tunes you have...
22696
Check this one for reference if you would like. It is very similar to the one that I am using in my Cruze. If you have any questions, I'll try to answer them if I can.
Thank you for taking the time to follow up on these.
{B7023} Airmass Limit
{B7024} Maximum Turbo Speed
{B7025} Maximum Pressure Ratio
These tables are missing from 12655493 for the Cruze and,
G0101} A/C Disable TPS
{G0102} A/C Enable TPS...
Just curious if there will ever be any _DMA or _M PID's available for the 4cyl E78? It seems that these are always mapped out for the V8, but never for the others. After this many years of being in...
So far this is working good. I knew what the descriptions should be, but it is confusing for some newer persons. Thank you for updating this issue.
So far for these OS's I've found the following tables do not have any description.
12656286
12655493
12663404
{B1518} B1518 - no caption yet
{B1519} B1519 - no caption yet
{B1511} B1511 - no...
I have reviewed the files that you have sent, and they are a great addition. Thank you all for taking the time to address this and find a solution. All your hard work is appreciated. Thank you.
Please be a little more specific as to what vehicle you are working with, and if possible, post your tune file so it is easier to help you out. There is much to learn about tuning, welcome to the...
12656286 E78 is the OS that I am working with. Thank you for taking the time to look at it, however I don't want you to waste a weekend on it.
I do not see the tracking correlation even with the WOT table. My table shows 3.75* int. & 3.8* exh. and my logs at WOT show 14.6* int. & 14.8* exh. at 100% throttle by SAE.TAC_PCT PID.
With the tables we have, I cannot command a given degree of cam phasing and have it track what is input into the maps. That leaves some other tables not uncovered controlling the actual VS desired...
It is based on BARO, but there is some tables missing to get more control over them.
The best place to read up on this is the "other" sites forum. They are more willing to share information than anyone on here. You have to dissect the table information some, but there is a TON of...
I have been trying to use both to figure it out. I have it working in V7 at the moment, but not sure how correct. I modified the sae_generic text file with "# - I4 is 28.96*4=115.84" and it gives...
19093
This is what I tried. Pretty sure it's all messed up.
Thank you for the information. Now I know why it did not work.
That would be great, I tried last night and kept getting an error.
Still not working with the latest software.
I'm not sure how to enter this as a USER CALC PID but I will try to build it by the instructions.
1909119092
I have tried to select APCYL_M and log but V2 tells me the PID is not valid and goes back to the PID selection screen. It will not even attempt to log anything unless the invalid PIDS are deselected....
Is there a way to log calculated or EFILive defined PIDs that require displacement when no input is available? I'm trying to log VE and APCYL_DMA on an E78 Sonic and it tells me they are not...
What vehicle are you working with?
Thank you for taking the time to add these files. They are greatly appreciated.
I am curious if there is anyone who has worked with the cam tables and whether there is any progress made in figuring them out. I have read up on how they work, but am having issues with them not...