Results 1 to 10 of 27

Thread: Constant 02 sensor codes

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Senior Member
    Join Date
    Oct 2006
    Posts
    197

    Default Constant 02 sensor codes

    I've been running LT's for a couple of years now with occasional codes. Lately, they have been popping up every day or two. I tried a new Denso and swapped it from side to side, but if anything, it was worse than the stockers. My fuel trims are fairly high, my exhaust smells rich, and my mileage is crappy.

    Three questions:
    1. Would lowering the O2 switch points possibly help?
    2. In order to run OLMAF, do I have have to do anything besides raise the CL temp enable (B4205) and disable fuel trims (B3801)? My cat protection (B0701) is already off.
    3. Is editing the B3605 OL Commanded Fuel advisable?

    Thanks for any guidance.
    Last edited by RevGTO; April 30th, 2009 at 12:31 PM.

Similar Threads

  1. Dtc 040 & 041 ?? EGR codes...
    By Nor-Cal Nick in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 14
    Last Post: October 12th, 2014, 01:21 PM
  2. Replies: 11
    Last Post: April 25th, 2010, 04:47 PM
  3. sierra 2008, AFR doesn't stay constant @ wot
    By odd boy in forum E37, E38 & E67 PFI ECM's
    Replies: 14
    Last Post: March 5th, 2009, 03:50 PM
  4. stock n02 reading constant 0.45mv
    By stigmundfreud in forum Gen III V8 Specific
    Replies: 4
    Last Post: August 16th, 2007, 12:13 PM
  5. Need help with a few codes.
    By slopokegtp in forum Gen III V8 Specific
    Replies: 5
    Last Post: July 27th, 2007, 12:36 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •