Results 1 to 10 of 10

Thread: lc1-afr?

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. September 16th, 2010 #1
    drdarthinvader
    drdarthinvader is offline
    Senior Member
    Join Date
    Aug 2008
    Posts
    108

    Default lc1-afr?

    im commanding 14.63-(b3647)
    14.63-(b3601/7) ol
    but on the lc1 /lm program the fuel is set to 14.70 gasoline ? Ive set the programmer to tune to diesel (14.63)
    Ive got steady bens 1.0 across the board no smoothing. am i getting closer to stoicimetric efficiency?
    Attached Files Attached Files
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Another lc1 question.. afr doesn't match on v2
    By picnic_george in forum General (Petrol, Gas, Ethanol)
    Replies: 32
    Last Post: May 14th, 2010, 07:47 AM
  2. Fuel Trims for 12.5 AFR with LC1
    By bobbycollier in forum General (Petrol, Gas, Ethanol)
    Replies: 0
    Last Post: February 19th, 2010, 04:25 PM
  3. Cold AFR doesn't follow commanded AFR
    By LS1_Dragster in forum Gen III V8 Specific
    Replies: 29
    Last Post: August 17th, 2009, 02:50 PM
  4. LC1 AFR output numbers
    By 1bar in forum General
    Replies: 31
    Last Post: March 23rd, 2009, 10:31 AM
  5. LC1 to V2
    By ALRAJHI in forum FlashScan V2 BB Logging
    Replies: 1
    Last Post: November 2nd, 2008, 09:44 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules