Cant get start up right
I have a gmpp hot cam in my truck that just doesnt seem to want to start right. I got the cold start up, but worm is a little troubling. My window computer just craped out so right now im on my mac so i cant do any tuning just yet but i would like to get some opinion on what changes i should make. thanks.
http://s261.photobucket.com/albums/i...t=DSCN0699.mp4
You have a MacBook...?
If you install Boot Camp it will allow you to partition the hard disk and install WinXP so you can then run the EFILive software.
More info on idle tuning:
Originally Posted by joecar
Yea ino i need to install windows on this computer but ive never gotten around to it. Im going to check out those threads but my idle is fine its just warm starts.
ok thank you i can see how those are going to help me.
Assuming this is a LS1 Gen 3 controller, 4.8, 5.3 or 6.0, Add more start up fuel to the ECT table for start-up. Increase Table B3604 from 80 degrees up all 24x cycles. Make it the same as the 70 degree C Row. Then play with B3632 to tweak it a bit. This should help your hot start problem. Post your tune when you get a chance and a start-up log and we can take a look.
Ok thanks lot I should have my windows in about 3 days so illl shoot you guys a log and see what i can do. And also if i stab the gas real fast it will die when coming back down to idle.
Ok what exactly do you want to look at for the log? What pid's?
Vortec:
Though this Tutorial is primarily written for LS1's, it is a good 'Template' to follow:http://forum.efilive.com/showthread....ips-amp-Tricks
Also check out Joecar's links in Post 3:http://forum.efilive.com/showthread....l=1#post139129
That should be a good start for you..
OK so i got the start up really nice, but why is it every time i reflash its starts PERFECT. Starts perfect a few more times, but then ill let my truck sit for a little and the starts up begin to get worse and worse. So ill reflash it again, presto perfect starts. Whats the deal?
Posting Permissions
Reply With Quote