Page 2 of 2 FirstFirst 12
Results 11 to 12 of 12

Thread: Uninstalling and reinstalling FlashScan/AutoCal USB drivers

  1. #11
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,120

    Default

    Quote Originally Posted by voda1 View Post
    I no longer have that version. Is it available somewhere yet?
    Sorry, my mistake, I meant build 235 (not 135) available here:
    https://www.efilive.com/latest/cat/download-efilive

    Regards
    Paul
    Before asking for help, please read this.

  2. #12
    Member
    Join Date
    Oct 2005
    Posts
    86

    Default

    Quote Originally Posted by Blacky View Post
    Adding the Virtual COM Port option won't help. FlashScan does not use that.

    I would recommend updating to the latest version here, except there is a known issue with the latest version that causes the exact problem you are seeing with build 235.
    We are working on it right now, as soon as it is fixed in the latest version, I recommend updating.

    I have found that doing this should allow V1 to work with the V7 software again:
    Uninstall V7
    Uninstall the USB drivers (using CMDUninstallerGUI described in the first post)
    Reboot the machine
    Re-installing V7.5.7.135
    Connect FlashScan and wait for Windows to fail to load the drivers
    Open up the device manager page, locate the FlashScan V1 entry, and re-install/update the drivers
    Browse to the Win-2K drivers and install those (yes, even on Win7 and Win8)

    Regards
    Paul
    Followed steps listed above but the FlashScan was immediately recognized when plugged in. Went to the device manager and installed the Win-2K drivers. Everything is working OK now.

    Thanks
    97 Vette 6spd, CamMotion Titan2 LS1 cam, TSP 5.3 StageII heads, Vararam intake, Z06 manifold, ARH headers/cats, Z06 catback, Monster Stage2 clutch, 04 Z06 pcv, new style knock sensor(late98 to 04).

    Using FlashScan V1 with NGK-AFX Wide band

Page 2 of 2 FirstFirst 12

Similar Threads

  1. FlashScan/AutoCal USB Drivers: IMPORTANT INFORMATION
    By Blacky in forum Software Updates and Installation Help
    Replies: 7
    Last Post: February 2nd, 2016, 04:23 AM
  2. Reinstalling V2 drivers
    By Dave_62 in forum FlashScan V2
    Replies: 3
    Last Post: March 28th, 2007, 10:16 PM
  3. V1 and V2 same USB drivers?
    By Bruce Melton in forum General (Petrol, Gas, Ethanol)
    Replies: 2
    Last Post: March 27th, 2007, 05:51 AM
  4. v3 usb drivers
    By ZL1Killa in forum General (Petrol, Gas, Ethanol)
    Replies: 2
    Last Post: February 15th, 2007, 05:20 PM
  5. USB drivers
    By killerbee in forum General (Petrol, Gas, Ethanol)
    Replies: 1
    Last Post: August 29th, 2006, 11:28 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •