i licenced a controller for a 2004 and 9044 os ,,, changed to a 6006 os and tryed to make a change and now efi says controller not licensed with a $0534 message?? any ideas what i did,,, pritty sure i didnt lock it
i licenced a controller for a 2004 and 9044 os ,,, changed to a 6006 os and tryed to make a change and now efi says controller not licensed with a $0534 message?? any ideas what i did,,, pritty sure i didnt lock it
From the Error Code list
$0534 Invalid Serial Number.
An attempt was made to program and license a controller that had a corrupt serial number.
It is possible for the serial number to appear corrupt due to a data transfer failure. Retry the operation a few times, if the error continues to occur then the serial number probably is corrupt. In that case, use the EFILive Tuning Tool software to full-flash the controller to restore the serial number.
What serial number appears?
Cheers
Cindy
tried it a couple more time and it says the same thing ,,, the number it says is 3280ct09bcp1
I've escalated your issue to support.
Cheers
Cindy
Make sure you are using the latest EFILive software, available here:
http://forum.efilive.com/showthread....te-Aug-06-2013
Then if the problem still occurs, please locate the appropriate trace files as per the instructions here:
http://support.efilive.com/kb_articl...8254-QOGC-9586
Send the trace files to me at paul@efilive.com
Regards
Paul
Before asking for help, please read this.
that did it guys ,,,thanks a bunch!