New tuner need help with PID's

[Mouth]

calc_pids002.txt

I been having issue with getting my AFR connected for DATA Logging. Its a AEM 41-4900. Can any one help please.

[joecar]

Thanks joe car is going very well, quite happy I am going to move my wo2 into the extractors tomorrow and get it smoothed out even closer. Are you able to look at my other post regarding the strange thing happening with my idle issue.
When talking D0930 - 2 is that tables D0930, D0931 & D0932?

I'll take a look...

[joecar]

Joe what would cause the car to have 3 degrees of Knock present and even when I go back to cruise it seems to be stuck at 3? You say the log looks good but I wouldn't have thought my VE map would be so spikey and uneven, can you explain this to me? If I wanted to go to a MAFless tune would I just use the Auto VE process?

Your VE is not spikey...

if you smooth those minor bumps and redo relog/reapply the map, you will see those bumps reappear... they do have some noise, but they are what the engine is doing.

[joecar]

calc_pids002.txt

I been having issue with getting my AFR connected for DATA Logging. Its a AEM 41-4900. Can any one help please.

What is the issue...?

# ==============================================================================
# File details
# ------------
#
# This section defines various details about the file format.

*FILE

#Parameter  Value            Description
#---------- ---------------- ---------------------------------------------------
VERSION     7.1.1            File version
DECSEP      .                Decimal separator used in this file



# ==============================================================================
# Units
# -------------------
# See sae_generic.txt for more information on the *UNITS section

*UNITS

#Code        System       Abbr            Description      
#----------- ----------   ------------  ---------------------------------------------------------
>>> delete this line:
 AFR_AUEGO1 W02-Analog   "AFR_AUEGO1"  "AFR_AUEGO"

# ==============================================================================
# Add slot definitions here
# --------------------------------
# See sae_generic.txt for more information on "SLOT" formats
#
#Units             Low          High      Fmt  Expression
#------------ ------------- ------------- ---- --------------------------------------------------------------
*CLC-00-001        
 AFR                8.5        18.0        .2   ({EXT.AD1}*2.3750)+7.3125    
>>> add a blank line here:
# ==============================================================================
*PRN - Parameter Reference Numbers
# --------------------------------
# See sae_generic.txt for more information on the *PRN section
#
#Code                      PRN   SLOT             Units          System            Description
#------------------------- ----  ---------------  -------------  ----------------  ------------------------------------------
>>> change "AFR,V" to "AFR":
CALC.AFR_AEUGO1            F001  CLC-00-001      "AFR,V"          "W02-Analog"         "AFR_AEUGO"
>>> add at least 2 blank lines here:

[Mouth]

joecar

It's not showing up in PID list to be selected. I save in the 7.5v user configuration

[joecar]

Does the AEM UEGO 41-4900 have a serial comms output...?

It's not showing up in PID list to be selected. I save in the 7.5v user configuration

Post your current calc_pids.txt file.

In the scantool, on the pids tab, click twice on the column heading "Parameter" (i.e. the right most column)(on it's heading/title) to sort the pid list by this column... then scroll down while looking at this column until you see your calc pid...

then on this pid do rightclick->More Info to see what other pids you may need to select.

[joecar]

Does the AEM UEGO 41-4900 have a serial comms output...?

If you can get it connected to V2 using serial comms, you will be better off (for a number of reasons):

V2 serial/digital input (AEM):
showthread.php?15748-AEM-compatibility
showthread.php?16636-Installing-an-AEM-Wide-Band-02-and-logging-afr
showthread.php?16904-AEM-EUGO-Lambda-W-B-how-to-connect-to-Flashscan-V2

[Mouth]

joecar,

No it do not have a serial comms

[jmsmotorsport]

Your VE is not spikey...

if you smooth those minor bumps and redo relog/reapply the map, you will see those bumps reappear... they do have some noise, but they are what the engine is doing.

That's what I wanted to hear thanks mate just need reassurance. Your a great resource to this forum.

[jmsmotorsport]

joecar,

No it do not have a serial comms

Can you post a link to your specific AEM wideband?