Results 1 to 8 of 8

Thread: Calculating Fuel Mass

  1. #1
    Junior Member PHLTHS's Avatar
    Join Date
    Dec 2014
    Posts
    21

    Post Calculating Fuel Mass

    Hi Guys,

    Is there any way to calculate the fuel mass being delivered in mm3 with all the PID's available in the E98?

    My current E98 OS:55499969 doesn't support the MM3VAL1_M DMA PID and I have asked EFI Live to correct this but they are busy at this present time and said they not be able to attend to it in the future.

    So, I must try and come up with another way to work out where in the fueling tables I am when looking at logs.

    Any help on a calc PID would be greatly appreciated.


    Thank you.
    HSV W427 / HSV SportsCat SV

  2. #2
    Forum tyhee Site Admin GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,032

    Default

    I'm going to add this in today for the next software rebuild.


  3. #3
    Junior Member PHLTHS's Avatar
    Join Date
    Dec 2014
    Posts
    21

    Default

    Quote Originally Posted by GMPX View Post
    I'm going to add this in today for the next software rebuild.
    Ross, I seriously would hug you....but...COVID.
    HSV W427 / HSV SportsCat SV

  4. #4
    Forum tyhee Site Admin GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,032

    Default

    This new RC release has the DMA PID's for your OS, mm3 and Inj uS. Please let us know how you go with it.

    Cheers,
    Ross


  5. #5
    Junior Member PHLTHS's Avatar
    Join Date
    Dec 2014
    Posts
    21

    Default

    Quote Originally Posted by GMPX View Post
    This new RC release has the DMA PID's for your OS, mm3 and Inj uS. Please let us know how you go with it.

    Cheers,
    Ross
    Hi Ross,

    Thank you for completing this. I can confirm those DMA PID's now log and display on the V2 FlashScan.

    I cannot currently display the data in either of the lastest v7.5 or v8 RC5

    I cannot find the PID in v7.5 and I can in v8 but it doesn't display any data just all 0.



    Thank you for your time.
    HSV W427 / HSV SportsCat SV

  6. #6
    Forum tyhee Site Admin GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,032

    Default

    I can't think why they would be not working in V8 pass-though when it works on the V2 (they share the same files).
    Although I didn't add in the details for your OS in V7 it should still be able to show those PID's from a log file.

    If you can do a pass-though in V8 logging those PID's showing as zeros and send the log to our support desk so we can check it out next week.


  7. #7
    Junior Member PHLTHS's Avatar
    Join Date
    Dec 2014
    Posts
    21

    Default

    Quote Originally Posted by GMPX View Post
    I can't think why they would be not working in V8 pass-though when it works on the V2 (they share the same files).
    Although I didn't add in the details for your OS in V7 it should still be able to show those PID's from a log file.

    If you can do a pass-though in V8 logging those PID's showing as zeros and send the log to our support desk so we can check it out next week.
    Hi Ross,

    Apologies for the delay, I can confirm the following:

    1: V2 BBX Logging does show the MM3 PID working on the screen, however if I open that log in V7.5 its unable to be displayed and in V8 it just shows as all zero's.
    2: Pass-through in V8 works perfectly file.

    If you need both logs I can provide them sir?


    Thank you.
    HSV W427 / HSV SportsCat SV

  8. #8
    Forum tyhee Site Admin GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,032

    Default

    If you could send them via the help desk rather than here that would be great.
    Thanks.


Similar Threads

  1. Help calculating my map
    By zbadestz in forum FlashScan V2
    Replies: 2
    Last Post: May 2nd, 2012, 08:13 AM
  2. Calculating timing?
    By AdamRRT in forum Cummins 5.9L
    Replies: 2
    Last Post: October 2nd, 2011, 08:25 AM
  3. Fuel Dynamics: How can we check fuel mass?
    By swingtan in forum E37, E38 & E67 PFI ECM's
    Replies: 5
    Last Post: February 4th, 2011, 04:06 PM
  4. Calculating Instantaneous Net Power
    By joecar in forum Tips and tricks
    Replies: 56
    Last Post: September 25th, 2008, 11:28 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •