Hi All,
Is it possible to hook up two LC1's via the serial input?
The wiring solution is nicer than trying to use the analogs.
Cheers
Hi All,
Is it possible to hook up two LC1's via the serial input?
The wiring solution is nicer than trying to use the analogs.
Cheers
Thats great.
Is there a diagram as to how to wire two serials up. One is obviously fairly easy, but the stock serial cable only has one input jack.
Cheers
Plug in the serial terminator jack/plug into SERIAL IN on WB #2.
Connect SERIAL OUT on WB #2 to SERIAL IN on WB #1.
Connect SERIAL OUT on WB #1 to the DB9 null-modem-gender-bender.
Connect the gender-bender to FlashScan V2 RJ12 input.
[or you can make your own DB9->RJ12 null-modem cable.]
See these links:
showthread.php?t=7532
showthread.php?t=8115
http://www.sfcable.com/cable/p/30D1-C1-S.html
That would make sense
Thanks for your help!