question on custom os 0202005

[joecar]

red = values left there by GM in PCM (undefined areas)
blue = intermediate values (not max or min)
green = final values (if you want max or min value)

May 10, 2011 22:34:36
EFILive Custom Calibrations
{A0001} Forced Octane Scaler Percentage, changed from "1600" to "99".
{A0002} Octane Scaler Limiter, changed from "1600" to "99".
{A0004} MAP Disable TPS VE Table, changed from "1280" to "104".
{A0005} RPM Disable TPS VE Table, changed from "12800" to "7999".
{A0006} TPS Disable TPS VE Table, changed from "1280.0" to "100.0".
{A0007} TPS VE Table, modified. {A0009} Boost VE Table, modified.
{A0010} Boost Timing Table, modified.
{A0011} PCM Input #1 Function, changed from "255" to "Not Used".
{A0012} Valet Mode Speed Limit with ETC, changed from "512" to "511".
{A0013} Valet Mode Speed Limit non ETC, changed from "512" to "511".
{A0015} N20 Monitor VE Multiplier, modified.
{A0017} N20 Monitor VE Multiplier Table RPM Enable, changed from "12800" to "7999".
{A0018} N20 Monitor VE Multiplier Table MAP Enable, changed from "1280" to "104".

__________________________________________________ ______________________________

May 10, 2011 22:37:51
EFILive Custom Calibrations
{A0001} Forced Octane Scaler Percentage, changed from "99" to "100".
{A0002} Octane Scaler Limiter, changed from "99" to "100".
{A0004} MAP Disable TPS VE Table, changed from "104" to "105".
{A0005} RPM Disable TPS VE Table, changed from "7999" to "8000".
{A0006} TPS Disable TPS VE Table, changed from "100.0" to "101.0".
{A0007} TPS VE Table, modified. {A0009} Boost VE Table, modified.
{A0010} Boost Timing Table, modified.
{A0011} PCM Input #1 Function, changed from "Not Used" to "N2O Monitor".
{A0015} N20 Monitor VE Multiplier, modified.
{A0017} N20 Monitor VE Multiplier Table RPM Enable, changed from "7999" to "8000".
{A0018} N20 Monitor VE Multiplier Table MAP Enable, changed from "104" to "105".

The red values are pretty wild, but the tunetool displays them using the max display value (with blue dogear corners on the cells).

You have to set intermediate values, save file and exit tunetool (important).

Then if you want to set final values, open tunetool/file, set values, save file.