I'm going to be swapping in a 4L80E into my 01 Silverado 5.3L 2WD. I started by doing a segment swap from the trans calibration and trans diagnostics from an 02 Silverado 6.0L 4L80E tune.

I noticed that there are quite a few differences in the DTC settings for the transmission between the 60E and 80E tunes. Most of the 80E DTC settings are "Non Emissions" while many of the 60E DTC settings are "2 Trips: Emissions Related". Some DTC's are not reported for the 60E and are reported for the 80E, and vice versa.

Should I go ahead and use all of the 80E DTC settings that are related to the transmission?