Cal Editor aka A.J.
Lead Calibrator at PCM Calibrators
ASE Master Certified since 1988 -- ASE L1, F1 & A9
GM Technician since 1999 -- GM World Class Technician since 2009
CNG Installer -- CSA Inspector
A handful of people out there who do have an intimate knowledge of GM Calibrations
Cal Editor aka A.J.
Lead Calibrator at PCM Calibrators
ASE Master Certified since 1988 -- ASE L1, F1 & A9
GM Technician since 1999 -- GM World Class Technician since 2009
CNG Installer -- CSA Inspector
A handful of people out there who do have an intimate knowledge of GM Calibrations
It seems to me the PCM generally does all of its work using EQR, and provides the AFR pid as a matter of courtesy/convenience/information.
If I lock this thread, then someone who may have some insight/revelation will not be able to post...
If you really want me to lock it, I will...
Does anyone have a dbf for something like an 01 Vette and the later flex fuel trucks? Maybe even the dbf for the bin's I posted.
Joecar if I overstepped the boundaries delete this post.
Cal Editor aka A.J.
Lead Calibrator at PCM Calibrators
ASE Master Certified since 1988 -- ASE L1, F1 & A9
GM Technician since 1999 -- GM World Class Technician since 2009
CNG Installer -- CSA Inspector
A handful of people out there who do have an intimate knowledge of GM Calibrations
I don't see any problem...
everyone has contributed their information/opinion in a civil manner... ...thanks to all, this is a credit to EFILive forum members...
discussion of differences is fine, everyone learns constructively...
I think mr.prick (his real name) was simply joking about the thread being quite long......but that's ok.