Results 21 to 30 of 31

Thread: Guide: How to flash the ECM with handheld: V2: BB

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. August 28th, 2010 #23
    mnotx
    mnotx is offline
    Senior Member
    Join Date
    Feb 2004
    Posts
    124

    Default

    I am running rev.130 on 7.5.6 and rev.111 of 8.1.2.

    I have updated V2 and it shows it has the latest updates. (Although I do not know where to go to see the actual firmware number)

    I do not have an F9 tab (Format Config) in EFi Live Explorer. Obviously I have done something wrong. Can anyone point me in the right direction?

    Correction, I found my current firmware and boot block: Firmware 2.06.40 Bootblock 2.06.03

    I may have found my problem. I do not have an SD card. Is this my problem? If so, what exactly do I need.

    Thanks! (I hate being ignorant)
    Last edited by mnotx; August 28th, 2010 at 02:05 AM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. C6 w/ A6 stuck in 4th after ECM flash only?
    By DVR IMP in forum 6 speed/8 speed RWD/FWD Transmission Tuning (incl T43, T76, T87)
    Replies: 5
    Last Post: January 22nd, 2011, 10:38 AM
  2. 2010 Camaro ECM Flash Counter?
    By RonC in forum E37, E38 & E67 PFI ECM's
    Replies: 6
    Last Post: September 2nd, 2009, 06:35 AM
  3. flash pinout? 05 ECM serv # 12591279
    By vectorbundle in forum General (Petrol, Gas, Ethanol)
    Replies: 11
    Last Post: July 1st, 2009, 02:55 AM
  4. can read but cant flash ecm
    By Aint Skeered in forum General (Petrol, Gas, Ethanol)
    Replies: 7
    Last Post: November 25th, 2008, 12:37 PM
  5. Holden VX,VY V6 flash ECM's
    By limited cv8r in forum General (Petrol, Gas, Ethanol)
    Replies: 7
    Last Post: April 21st, 2008, 01:33 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules