So I've re-installed my old box tune, then un-installed the box tune. Now when I try to read the truck it says, "script file not supported by current software version".
Any ideas?
http://forum.efilive.com/showthread....792#post146792
Read from post #25 onwards.
Regards
Paul
Before asking for help, please read this.
It's me again, sorry I'm being such a pain!
I seem to be having a licensing problem now. V7.5>Help>FlashscanV2/AutoCal V2 Vin Licensing>Upgrade. The Cummins section is greyed out. I went to Flash my truck for the first time and went through the normal windows according to the how-to guide. I clicked License and got the error message displayed here. Any ideas?
The Cummins Section is greyed out now because you can't activate it again (you already own the Cummins option).
Before flashing check, in the V7 Tune Tool, that the B9999 Calibration ID on the details page says "OK To Flash". If that is OK then go ahead an try doing the flash in the V8 application.
Andrew
EFILive Crew
Roger that. I had to DL a stock tune from compd because I couldn't get the "ok to flash" (box tune wouldn't let go). I found the matching Cal (original-35325853AG, OS-11352409), and DL 35325853AK (11352602), now I'm getting a warning telling me that "Operating system mismatch between file: (11352602) and controller: (11352409)." There is a box to override it, should I override it?
Before asking for help, please read this.
The dialog box in the image is displayed when the controller is in a partially programmed state or in a state where FlashScan cannot determine if it has been licensed or not. Rather than prevent you from flashing a controller when the license state cannot be determined, FlashScan will allow the controller to be flashed - even if it has not been licensed before. After it has been flashed successfully by FlashScan, the next time you attempt to flash it FlashScan will (should) be able to determine the license status. If FlashScan determines that it has not been licensed yet, you will be required to license the controller.
Regards
Paul
Before asking for help, please read this.
Thanks for all your help EFI Live, I was able to flash-change the VIN-save the tune with my VIN.