Calc.VET: correcting MAF and calculating VE (in single log)

[pormgb]

Just done done a Calc VET and things look good except my Idle, my idle is rich when cold, around 12.5 then goes up to around 14.5 when warm. I've also noticed that when slowing down my revs drop quite low but the motor doesn't stall. I didn't think a Calc VET would affect idle since you filter out cells below 800 rpm, I do see one cell at 800rpm-60kpa. Do I need to re tune Idle, I've also attached a copy of my Calc VET log.

Thanks!!