Public release, March 29, 2012

[Blacky]

I tried the method above and it still wouldn't work. I found I had to go into the EXPLORER program and manually delete the files from the options tab and then format and program all to get mine to work.

There are two file systems that can be formatted. If you format the DATA file system, that will have no effect on your config files. You'd need to format the CONFIG file system. If the CONFIG file system was formatted then there would be no files left in the CONFIG file system (i.e on the [F9: Config Files] tab page) for you to delete. It may be possible that you formatted the DATA file system, thinking it was formatting the CONFIG file system.

Some background info that may help...

You can only format the CONFIG file system from a PC, using either the drop down menu format option of the [Program] button in the BBX setup window, or from the [Format] button on the [F9: Config Files] tab page in EFILive Explorer.

You can only format the DATA file system using FlashScan's or AutoCal's on-board file system format option.

The reason you cannot format the CONFIG file system from the FlashScan or AutoCal device is so that you do not accidentally format it while away from a PC (i.e. at the track). If you did that then your device is useless until you can reload the config files from your PC.

Regards
Paul

[Blacky]

Can I install the V8 package without the FTDI driver??????
I would like to have the V7/V8 on one laptop for editing the tunes but not touch my existing FTDI drivers...

No you can't install without the drivers, they are automatically installed during installation.

Regards
Paul

[hhrecovery]

I tried to upload a new file into my truck today. .. I keep getting EFI Live script exited with code $312 Sub Function not supported or invalid.... I have updated everything to the newest version and firmware.. If someone could help me out I would appreciate it... Thanks.

[Blacky]

I tried to upload a new file into my truck today. .. I keep getting EFI Live script exited with code $312 Sub Function not supported or invalid.... I have updated everything to the newest version and firmware.. If someone could help me out I would appreciate it... Thanks.

There's a bunch of information we'd need to collect from you to help track down the problem, it would be best if you logged a help desk ticket here: http://support.efilive.com/

Regards
Paul

[GMPX]

I tried to upload a new file into my truck today. .. I keep getting EFI Live script exited with code $312 Sub Function not supported or invalid....

Has there been any previous programmers loaded on to this truck?
Are you able to read the tune out of the truck ok?

[hhrecovery]

Has there been any previous programmers loaded on to this truck?
Are you able to read the tune out of the truck ok?

Nothing else ever used... It has a tune in it now and I have been running it for a couple weeks like this... I had a new tune made to make some minor changes and now it won't upload or read the current tune...

[GMPX]

Did your tuner lock it?

[hhrecovery]

Did your tuner lock it?

Sorry, as in read. I meant it won't read the tune that is currently in the truck..

[davematthews]

If your tuner locked it. You can't read the file that's in the truck. Or view the file in the Tune software. All you can do is flash over it.. Only if the tune that is currently on your truck is locked. Not the tune your trying to flash in.. COurse if that ones locked too. You'll have the same issue with it.

[Tre-Cool]

can i ask when the accessory power flicker at about the 46kb mark on the e38's happened?

i only flash with the 7.5 program and it's annoying as all hell when programming and it resets anything powered up by the accessory power circuits, including the stereo and lights. (in ve commodores).