Chev/Holden 1.4L Cruze E85 FlexFuel Conversion

[GMPX]

please tell me the Verano T will be EFILive friendly

Are they out yet?
I would bet it's using the E39 ECM, so yes it'll be EFILive friendly.

[Boost]

Yes!!!

[scdyne]

Well the Verano T has the same general engine (LHU) as in the Solstice/SKY Turbo models (LNF) and the ECU is Bosch for the Solstice/SKY.
But EFILive supports it in the Regal GS that uses the LHU so does that mean that it's supported?

Grrrrr... I was planning on purchasing a new car this weekend.. Will it be a Cruze, Regal GS, or 328i? Now we can consider the Verano T... grrrr... decisions decisions..

[GMPX]

Bosch ECM's are history with the GM SIDI engines now, everything has switched to the E39.
I don't know what the Verano T looks like, but if I had all those as an option I'd probably take the Regal. The Cruze is a good car, but it's a little bit too small.

[Boost]

The Verano is a Cruze, with some nice Buick touches and big engines.

[GMPX]

You guys have all the choices

[Boost]

I am having a strange issue with logging the Cruze. When I try to log any other PIDe than the same ones I always have in my shared logs, I get an error. This includes even validated E78 PIDs. If I add just one new parameter (for example, Current Gear or Octane Scaler) it won't work at all.

[VTuner]

Keep your total number PID channels below 24 and it should be fine (try removing 1 or 2 PIDs and try it again). I have not asked Ross about this, but it seems like we are limited to 23-24 PIDs max, even when using Dynamic mode.

[GMPX]

Are you using a laptop or the V2?
My laptop has never even been in the Cruze, I just use the V2 (for logging and flashing). The V2 will log more PID's and faster than V7.5 pass through.
On the V2 I have 42 channels on the ECM and 22 on the TCM, but I think I'm going to drop the TCM from my logs for some extra speed.

[VTuner]

Are you using a laptop or the V2?
My laptop has never even been in the Cruze, I just use the V2 (for logging and flashing). The V2 will log more PID's and faster than V7.5 pass through.
On the V2 I have 42 channels on the ECM and 22 on the TCM, but I think I'm going to drop the TCM from my logs for some extra speed.

The 24 channel limit is with the pass through.