Page 4 of 6 FirstFirst ... 23456 LastLast
Results 31 to 40 of 51

Thread: cant flash an 07

  1. #31
    New Member
    Join Date
    Jun 2011
    Posts
    7

    Default

    Quote Originally Posted by kenturbo View Post
    start to finish - read pcm with v2, did not notice i had 601 boot loader. made all mods to tune & blew file in. truck had no crank situation. i then reinstalled original tune & started truck. loaded h&s tuner in truck & road tested, brought back in shop & returned pcm to stock with h&s tuner, i then flashed in original efi live tune & all ok, i did not reread pcm at that point to see if boot loader had changed
    Thanks for the reply
    Roger
    2006 4x4 Dually Quad 6 speed stock now running EFI Live Tune.

  2. #32
    Junior Member
    Join Date
    Mar 2009
    Posts
    33

    Default

    so i wonder if that would work on a 2010?

  3. #33
    Lifetime Member Boost's Avatar
    Join Date
    Dec 2006
    Posts
    1,506

    Default

    That is a good question, but I don't think so.
    '12 Caprice PPV 6.0 L77 - daily transportation
    8.7 @ 84 (1/8 mile) bolt-ons

    '02 Silverado RCSB 5.3 L59 - regularly street driven
    8.2 @ 86 (1/8 mile) stock cam and spray
    8.6 @ 84 (1/8 mile) cam and heads no spray

    Our YOUTUBE CHANNEL featuring the Silverado

  4. #34
    Junior Member
    Join Date
    Mar 2009
    Posts
    33

    Default

    i didnt figure it would. i did use the h&s trick today to get around the bootloader in this thred. worked just fine.

  5. #35
    Lifetime Member 2007 5.9's Avatar
    Join Date
    Nov 2010
    Posts
    1,835

    Default cant flash an 07

    So using H&S...you loaded a tune from them, returned to stock, then you were able to read the stock file and flash a EFI tune into the ECM??
    Les Szmidt
    2007 5.9 Dodge Ram
    2014 Ram 3500 Aisin tuning Emissions Equipped
    EFI Live Cummins BETA Tester
    Silver Bullet Tuning
    silverbullettuning@gmail.com
    www.youtube.com/ljszmidt
    http://www.facebook.com/SilverBulletTuninig

  6. #36
    Lifetime Member
    Join Date
    Nov 2005
    Posts
    1,753

    Default

    Quote Originally Posted by TorqueDieselLLC View Post
    so i wonder if that would work on a 2010?
    It's a different ECM with different security measures, so it won't work

    Cheers
    Cindy

  7. #37
    Senior Member
    Join Date
    May 2009
    Posts
    195

    Default

    Quote Originally Posted by 2007 5.9 View Post
    So using H&S...you loaded a tune from them, returned to stock, then you were able to read the stock file and flash a EFI tune into the ECM??
    Les,

    I have been doing this with smarty but I read ECM First and save that tune to go back to if needed and use an 09 operating system non 601 bootloader to build a tune from. The smarty changes the boot loader.

  8. #38
    Senior Member
    Join Date
    May 2009
    Posts
    195

    Default

    The reason I keep the smartys one for 5.9 and one for 6.7 is to adjust the speedometer. Again read, save, program with smarty, adjust speedo, return to stock with smarty, and speedo setting stays then build tune with previously read file or obtain a clean file if needed and flash in and speedo is accurate and truck is properly programmed

  9. #39
    New Member
    Join Date
    Mar 2012
    Posts
    4

    Default

    I,m having trouble with anti tuning fault then flash aborts. Tried to load h&s then return to stock with no luck still wont let me flash it , the h&s works fine when loaded. Any help would be appriciated

  10. #40
    Lifetime Member
    Join Date
    Nov 2005
    Posts
    1,753

    Default cant flash an 07

    What is the exact message you get. Please include error code details too.

    Cheers
    Cindy
    I no longer monitor the forum, please either post your question or create a support ticket.

Page 4 of 6 FirstFirst ... 23456 LastLast

Similar Threads

  1. Can't flash
    By cmitchell17 in forum Duramax LLY
    Replies: 10
    Last Post: May 11th, 2010, 03:31 AM
  2. did i flash or not
    By Eric in forum Gen III V8 Specific
    Replies: 3
    Last Post: March 30th, 2010, 06:18 AM
  3. Pre Full Flash to Full Flash Tune Question
    By Donovan in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 1
    Last Post: January 13th, 2010, 12:43 PM
  4. No Flash!
    By horsehaulin in forum Duramax LB7
    Replies: 10
    Last Post: May 31st, 2008, 04:22 PM
  5. Have to flash twice?
    By zapp168 in forum Gen III V8 Specific
    Replies: 2
    Last Post: June 8th, 2007, 10:33 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •