Update: May 25, 2013

[2007 5.9]

Still having issues opening v7.5 tune tool with v2 plugged in.

Won't open, just sits with status bar at full green but never opens.

[blazin dmax]

Still having issues opening v7.5 tune tool with v2 plugged in.

Won't open, just sits with status bar at full green but never opens.

im having the same issue. and if i open v7.5 tune tool then plug my v2 in and try to read or flash my truck. it gives me an error and says to check that all cables are connected correctly and try again. but still never works.

[Blacky]

Still having issues opening v7.5 tune tool with v2 plugged in.

Won't open, just sits with status bar at full green but never opens.

With no EFILive software running, edit the registry using regedit and delete EFILive's MRU key as shown in the image below.
That will clear the list of "most recently used" files and when EFILive starts up it will not try and load any files.



Regards
Paul

[Blacky]

im having the same issue. and if i open v7.5 tune tool then plug my v2 in and try to read or flash my truck. it gives me an error and says to check that all cables are connected correctly and try again. but still never works.

Make sure you have the latest USB drivers installed. See this posts for more info:
http://forum.efilive.com/showthread....NT-INFORMATION

Regards
Paul

[2007 5.9]

With no EFILive software running, edit the registry using regedit and delete EFILive's MRU key as shown in the image below.
That will clear the list of "most recently used" files and when EFILive starts up it will not try and load any files.



Regards
Paul

Tried it and no results. Still fails t open with V2 connected.

[Blacky]

Tried it and no results. Still fails t open with V2 connected.

Are you absolutely certain that the latest USB drivers are installed for FlashScan V2?
You can check using Windows device manager, with FlashScan connected...



Regards
Paul

[2007 5.9]

Yes sir...

[Blacky]

Can you activate startup-logging in the V7 software by changing the "EFILive Tune Tool" desktop shortcut (right click on it and select Properties) to have " /l" (that's space, forward-slash, lowercase L) at the end of the Target item, like this:


Then re-run the V7 software and after it stops, locate the StartupLog.txt file in the \Program files\EFILive\V7.5 folder and send it to me at [email protected]

Regards
Paul

[2007 5.9]

Sent...I tried one with v2 plugged in but obviously that didn't work.

So it's a log of just 7.5 opening.

Hope that helps you. I'm up for another hour or so if you still need assistance Paul.

[Blacky]

Sent...I tried one with v2 plugged in but obviously that didn't work.

So it's a log of just 7.5 opening.

Hope that helps you. I'm up for another hour or so if you still need assistance Paul.

I need to see the log file that is created when the startup hangs.
The log file should still be created/updated even if the software hangs.
i.e. While the software is hanging, send the startuplog.txt file - it should show me where the software is hanging

Regards
Paul