Update: June 06, 2013

[Blacky]

and well.... looks like I learned that lesson a tad bit too late and hit yes... ugh.... wasted license...

Send me your FlashScan serial and auth code as per these instructions
http://support.efilive.com/kb_articl...2143-YUOG-8049
and we'll replace the license.

Send them to [email protected]

Regards
Paul

[Chavez91]

Sent.

Thanks again!

[comnrailpwr]

So what do we do if a lb7 or lly controller doesn't recognize it has been licenced? First I have heard if this.

[comnrailpwr]

cummins 5.9 ECM.
parameter c1503 description reads "If the actual boost pressure remains below {C1504} "Low Boost Check Threshold" for this low a low boost DTC will set."

i believe it should read "If the actual boost pressure remains below {C1504} "Low Boost Check Threshold" for this long a low boost DTC will set."

[EagleMark]

That brings up a question? There's a lot of those descriptions I'd like to change, correct or at least reword. Any way too?

[kangsta]

you can use the "User Comments" field to save your own notes againts the cal

[GMPX]

English was not a subject I excelled at during school, nor does it help that typing those descriptions is really, really tedious work

[EagleMark]

Don't want notes in the .tun file. Want them there in EFI Live so whenever I open a tune file I have all my notes!

[cindy@efilive]

Don't want notes in the .tun file. Want them there in EFI Live so whenever I open a tune file I have all my notes!

If the descriptions are not accurate, we should review them. Put your list in this thread so we can make a start.

Cheers
Cindy

[kangsta]

Don't want notes in the .tun file. Want them there in EFI Live so whenever I open a tune file I have all my notes!

The notes I was referring to was against the cal number in EFILive not the tune file.