EFILive V7.5 Hanging When Starting Up or Shutting Down

[Blacky]

Thanks Paul, quick question, is this FW considered an upgrade from the original build 235 FW. Would there be any reason we would have to go "back" to the original build 235 FW release? Also is there a plan to correct the issues with the 235 build to get it to operate with your latest FW above?

Ed M

The firmware I posted will work with versions of V7 from build 230 to build 237.
Regards
Paul

[mowton]

The firmware I posted will work with versions of V7 from build 230 to build 237.
Regards
Paul

Thank you again Paul. Loaded firmware and am giving it a try.

Ed M

Update 10:25 PM est -- Loaded good and 7.5 (build 230) started up good, proper flash icons etc. Scan tool loaded as well. Will try out on vehicles tomorrow morning.

Again, thank you Paul for your great support and fix. Now we both can enjoy the rest of the weekend (1 hr left for me )

[mowton]

Tested today on 2 cars LS1 and E38 and all worked great. Tune, Scan and Custom OS worked as previously with build 230.

Thanks again Paul and the team at EFI Live

Ed M

[Brads_rs]

Is there anywhere to download an older version of V7 (V7.5.7 build 230)?

[mowton]

Is there anywhere to download an older version of V7 (V7.5.7 build 230)?

http://forum.efilive.com/showthread....se-Apr-23-2013

You can find all version in this section

PS -- April 23rd is our Anniversary

Ed M

[Blacky]

Is there anywhere to download an older version of V7 (V7.5.7 build 230)?

No, we don't keep old versions on our servers. But I have re-uploaded build 230 here:
http://download.efilive.com/Software....230_Setup.exe

Regards
Paul

[mowton]

http://forum.efilive.com/showthread....se-Apr-23-2013

You can find all version in this section

PS -- April 23rd is our Anniversary

Ed M

My bad, should have checked the link in this thread.....

Sorry

Ed M

[Brads_rs]

All is working well now. Went back to build 230 with the firmware that paul posted. So far so good

[IJ.]

Where are we with this Paul?

Will 2.37 work with the New/Old Firmware correctly or is it better to Install 2.30 and the FW?
(been away from the tuning side of things dealing with another mechanical failure, last time I used 2.35 it was hanging on shutdown so I had to do all my edits load the file into the V2 and program from there)

[mowton]

Where are we with this Paul?

Will 2.37 work with the New/Old Firmware correctly or is it better to Install 2.30 and the FW?
(been away from the tuning side of things dealing with another mechanical failure, last time I used 2.35 it was hanging on shutdown so I had to do all my edits load the file into the V2 and program from there)

If you are having problems with the latest build (237/235) and firmware (7.45), your best resolution seems to be to load the 230 software and the latest (7.46) firmware. We did and all issues were resolved (with the exception of course what the new software alleviated) and we were back in business.

Ed M