EFILive encourages customers to use this public update in their production environments.
Download here:
Updates:
V7
- Fixed V1 not working correctly with the V7.5 software.
- Fixed DTCs not being displayed by the V7.5 Scan Tool software.
- Fixed memory leak in the "run script" function
V8
- Fixed EFILive Control Panel (aka EFILive_HAPI.exe) so that when Windows is shutdown, the control panel software will terminate without preventing Windows from shutting down.
- Updated custom unit definitions so that they can now be applied to sub PIDs. Fro example the PID WO2S11 has two sub PIDs: EQ_RAT11 and WO2S11V. Those sub PIDs can now have custom units defined for Black Box Logging and Scan Tool display.
- Added a Ctrl+F2 hot key option to enable/disable mouse control of the chart inspector.
- Fixed problem that caused some "signed" PIDs to be displayed using an "unsigned" format.
- Changed display units of all "Fuel Air Equivalence Ratio" PIDs from "EQR" to "Lambda". Fuel Air Equivalence Ratio" is the same as lambda, "Air Fuel Equivalence Ratio" is the inverse of lambda. Note: The EFILive V7.5 Tuning Tool software uses EQRatio to mean "Air Fuel Equivalence Ratio". The change to the PID units was to standardize terminology.
Firmware
Known Issues:Please post issues, questions, clarifications (large or small) in this thread.
As issues are reported and confirmed they will be re-posted as "Known Issues" below.
Version Numbers:
After installing the latest release you should have the following software, boot block, firmware versions installed:
EFILive V7 software: V7.5.7 Build 241
To view the installed version, select Help->About (in the V7 Scan or Tune software).
EFILive V8 software: V8.2.2 Build 234
To view the installed version, select Help->About (in the V8 Scan and Tune software).
Boot Block: V2.07.06 (Jul 31, 2013)
To view the installed version, Select F7: Licenses (in the V8 Scan and Tune software).
Firmware: V2.07.49 (Aug 02, 2013)
To view the installed version, Select F7: Licenses (in the V8 Scan and Tune software)