Originally Posted by
Mouth
calc_pids002.txt
I been having issue with getting my AFR connected for DATA Logging. Its a AEM 41-4900. Can any one help please.
What is the issue...?
Code:
# ==============================================================================
# File details
# ------------
#
# This section defines various details about the file format.
*FILE
#Parameter Value Description
#---------- ---------------- ---------------------------------------------------
VERSION 7.1.1 File version
DECSEP . Decimal separator used in this file
# ==============================================================================
# Units
# -------------------
# See sae_generic.txt for more information on the *UNITS section
*UNITS
#Code System Abbr Description
#----------- ---------- ------------ ---------------------------------------------------------
>>> delete this line:
AFR_AUEGO1 W02-Analog "AFR_AUEGO1" "AFR_AUEGO"
# ==============================================================================
# Add slot definitions here
# --------------------------------
# See sae_generic.txt for more information on "SLOT" formats
#
#Units Low High Fmt Expression
#------------ ------------- ------------- ---- --------------------------------------------------------------
*CLC-00-001
AFR 8.5 18.0 .2 ({EXT.AD1}*2.3750)+7.3125
>>> add a blank line here:
# ==============================================================================
*PRN - Parameter Reference Numbers
# --------------------------------
# See sae_generic.txt for more information on the *PRN section
#
#Code PRN SLOT Units System Description
#------------------------- ---- --------------- ------------- ---------------- ------------------------------------------
>>> change "AFR,V" to "AFR":
CALC.AFR_AEUGO1 F001 CLC-00-001 "AFR,V" "W02-Analog" "AFR_AEUGO"
>>> add at least 2 blank lines here: