Anyone else having problems connecting to VPW controllers in pass-through? I can't get EFILive Scan to connect to my ECM or TCM (LLY) for ANYTHING... It's set to Flashscan v2.5 USB, and will connect to my 6 speed Allison TCM. I've tried to get it to connect to my LLY ECM and TCM both on the bench and in the truck with the same results.
Also, whats up with the PIDS? The PIDs in the "PID Descriptions" folder don't match the validated PIDs from EFILive Scan. For Example, according to Scan, the 6 speed's TSTATE03 is PEMA, TCCRSW, KDWNACT, CRZON, CLBRSW2, & ACCLUT. According to the txt file in "PID Descriptions", TSTATE03 is SHSOLE, SHSOLD, SHSOLC, TFPSWR, TFPSWE, TFPSWD & TFPSWC. Which is right? I don't think any of the TSTATE PIDs match between the two...
Also..... When there's a GMLAN controller (6 speed TCM) and a VPW Controller (LLY ECM) present, the V2 won't connect to either of them in BBL mode (Press F2 and nothing happens), but will connect to the TCM in pass through.
Reply With Quote