Results 1 to 10 of 86

Thread: I made a cable for BB Logging

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. May 21st, 2008 #15
    jomobco
    jomobco is offline
    Junior Member jomobco's Avatar
    Join Date
    Aug 2007
    Posts
    31

    Default

    Quote Originally Posted by Blacky View Post
    Maybe this diagram will help:
    http://forum.efilive.com/showthread....1088#post71088

    Regards
    Paul
    I think somethings off in the diagram above. I kept getting that the controller wasn't found. I then went with the RJ12 to 2.5mm diagram posted previously and that worked. Success!

    I should temper that. I'm getting free air numbers, not AFR numbers. It goes from 1-3% then jumps to 20.9% momentarily and then back to 1-3%. What is going on?
    Last edited by jomobco; May 21st, 2008 at 07:27 AM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. The monkey made me do it.
    By mr.prick in forum Lounge
    Replies: 6
    Last Post: September 12th, 2009, 02:02 PM
  2. now I know I made the right choice
    By limited cv8r in forum Lounge
    Replies: 13
    Last Post: November 21st, 2007, 05:40 PM
  3. Just made an interesting find
    By shakinlm7 in forum General (Petrol, Gas, Ethanol)
    Replies: 7
    Last Post: November 5th, 2007, 11:59 AM
  4. Made 751 Rwhp On Only 14 Psi Thanks To Efilive!! Vid!
    By nitrorocket in forum General (Petrol, Gas, Ethanol)
    Replies: 2
    Last Post: June 7th, 2006, 02:59 PM
  5. Anyone made a custom mpg (or km/L) PID?
    By thunder550 in forum General
    Replies: 3
    Last Post: May 17th, 2006, 04:38 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules