Flashscan data logging..

[joecar]

You mean the timing tables..?

B5913 and B5914.

[waterbug1999]

This one??

we just changed them all to 6600, which is where I have it shift at supposedly.

[waterbug1999]

You mean the timing tables..?

B5913 and B5914.

Are those the tables you were wanting on post #107?

[waterbug1999]

im looking at this...

[joecar]

Also show Shift At VSS->Downshift->Parameters.

[joecar]

I bet your WOT 2->3 D0915 is less than WOT 3->2 D0930...

This would mean that it never shifts WOT 2->3 but jumps on to 4th.

I can see why your WOT MPH upshift points are all low, you're trying to control WOT upshift using RPM only...

This is fine, but the each WOT upshift point has to be higher than the corresponding WOT downshift point.

[waterbug1999]

Also show Shift At VSS->Downshift->Parameters.

This?/

[waterbug1999]

I bet your WOT 2->3 D0915 is less than WOT 3->2 D0930...

This would mean that it never shifts WOT 2->3 but jumps on to 4th.

I can see why your WOT MPH upshift points are all low, you're trying to control WOT upshift using RPM only...

This is fine, but the each WOT upshift point has to be higher than the corresponding WOT downshift point.

thats was the logic... To just use RPM only and take out the other variable.

[waterbug1999]

Jody,

Try this Options.ini file... I edited some of the pids to better suit your purpose.

Cheers
Joe

i opened it up and replaced it with the "option" one that was in there. You want me to use the 1st one right?

A->, IBPW, LS1B_A.pmm, PSL_A, PCU, 1

[joecar]

i opened it up and replaced it with the "option" one that was in there. You want me to use the 1st one right?

A->, IBPW, LS1B_A.pmm, PSL_A, PCU, 1

Have a look at the pids in each of the 5 lists... print them out... and use whichever is suitable at the moment you need to log.