Flashscan data logging..

[mr.prick]

Hey Joe,
you should take post #157 and make a sticky for serial WBO2 and
BBL options.txt formatting.

[waterbug1999]

Ok, you have to upgrade both software and bootblock/firmware...

After that, do Help->About in scantool (ST) or tunetool (TT) and it should say build 84.

Start EFILive Explorer (EE), goto Firmware tab, click About, it should say Build 44;

Then, still in EE Firmware tab, update the bootblock to 2.06.02 (checkmark Bootblock box) and the firmware to 2.06.06 in that order.

OK.. This should be done. I did not know where to go to see the "build 84" though. EE did say build 44.

[waterbug1999]

After updating the V2 bootblock and firmware (2.06.02 and 2.06.06) as shown above,

read this:
Also, read this:

Ok.. This is done.

[waterbug1999]

Use attached Options.txt file, copy it to:
C:\Documents and Settings\All Users\Application Data\EFILive\V8\Config

Then start EE, goto Config Files tab, drag these files from the upper pane to the lower pane:
LS1B_A.pmm
Options.txt

You only need the pmm file for your car (LS1B_A = 1999+ LS1 with A4 transmission (includes 12212156 and COS5)).

Exit EE, and remove USB cable.

I dont have that.

[waterbug1999]

I tried to open one of my tunes to look at a few things and a pop up window came up saying its a "DEMO". Whats that about?

Also, the icons are still saying 7.5

[joecar]

OK.. This should be done. I did not know where to go to see the "build 84" though. EE did say build 44.

In scantool or tunetool go Help->About.

[joecar]

Jody,

Do you have Vista...?

For Vista, the location is under C:\Program Data\...

[joecar]

I tried to open one of my tunes to look at a few things and a pop up window came up saying its a "DEMO". Whats that about?

Also, the icons are still saying 7.5

Do you have the blue card that came with EFILive...?

Open ST or TT and go Help->Register EFILIve and enter all the information from the blue card exactly as shown on blue card (do not enter your name unless the blue card shows your name).

[joecar]

Copy the attached Options.txt file to either of:

WinXP: C:\Documents and Settings\All Users\Application Data\EFILive\V8\Config
Vista: C:\Program Data\EFILive\V8\Config (I don't remember is this is right).

[waterbug1999]

Jody,

Do you have Vista...?

For Vista, the location is under C:\Program Data\...

Yea, its vista.