~Erik~
2013 Sonic RS Manual - 1.4L I4T E78, tuned, turbo mods, etc.
2008 TrailBlazer SS 3SS AWD Summit White - LS2 E67/T42, bolt ons, suspension, etc.
2002 Chevy TrailBlazer LT 4X4 Summit White - 4.2L I6 P10, lifted, wheels, etc.
Is this going to replace V7.5 completely soon ?
2005 1500 HD , Custom OS3 SD tune .
2006 Trailblazer
Dinosaurs and Plants gave their lives so that we may drive , long live fossil fuel .
Hello,
I'm trying to set up my pids with the new software and I get this....see attached.
I must be missing something somewhere.
Can anyone point me in the right direction, everything else seems fine.
Thanks,
Brad
99 Firebird Formula, M6, LS6 intake, headers, catback, lid, BRE cam.
EFI V2, V7.5.5 (Build 149)
V8.1.2 (Build 142)
Boot Block 2.07.01 Oct 14, 2010
Firmware 2.07.05 Jan 29, 2011
LC-1 with serial cable
COS 5
It means that the PCM you are using does not support that particular PID.
In the short term, you need to remove the PID from the list of selected PIDs in the BBL setup software and re-program the FlashScan with the new PID selection.
In the long term... it is a DMA PID which is supported/unsupported depending on the operating system number of the PCM. It may be that we have not added support for that PID for the particular operating system of your PCM.
Can you send the OS number of your PCM? Use the FlashScan device, menu option: F2->F2->F1 to get the operating system number.
Regards
Paul
Before asking for help, please read this.
So some of the PIDs are not supported for BBL right now?
512k RoadRunner Firmware 12.14R
FlashScan V2 Bootblock V2.07.04 Firmware V2.07.22 EFILive V7.5.7 (Build 191) V8.2.1 (Build 181)
LC-1 WBO2
_________________________________________________
In the Flashscan Menu Items section, I can only see LS1, LS2, LB7 and LMM options (all "sample"). I am looking for the LBZ,AL6 PID list. How do I get this, or is this not possible on this release?
2007 Chevy 2500 Classic, LBZ Duramax, 4X4, LT3, CCSB Mods so far: Nicktane Fuel Filter, EFILive V2, PAC AAI-GM24 Aux Stereo Input (great for connecting the MP3 player).
Paul has set BBL up now to be 100% user defined, as in you need to open up S&T then add the proper vehicle (in your case LBZ and AL6). Once you have that setup, click on it then add PIDs to the lower left pane!
~Erik~
2013 Sonic RS Manual - 1.4L I4T E78, tuned, turbo mods, etc.
2008 TrailBlazer SS 3SS AWD Summit White - LS2 E67/T42, bolt ons, suspension, etc.
2002 Chevy TrailBlazer LT 4X4 Summit White - 4.2L I6 P10, lifted, wheels, etc.
In the blue section, right click an Unused row and select Properties. In that Properties screen you can select which controller you want to configure. You can delete/overwrite the sample ones if you want.
Each item that you set up in the blue section, corresponds to an item in FlashScan's/AutoCal's PID selection menu.
Remember to use the [Program] button to program the changes back into FlashScan/AuotCal.
Regards
Paul
Before asking for help, please read this.
dinorex, for example, look at post #210: showthread.php?p=94515#post94515
Paul, is there a way to set the non-custom precision...?