So its a new year. Any further progress with t43 calibrations? I would be extremely happy if I could get the gear pressure stuff in the adaptive learning area like we have in the early models for the 24256125 OS.
It's a series 2 VE commodore.
So its a new year. Any further progress with t43 calibrations? I would be extremely happy if I could get the gear pressure stuff in the adaptive learning area like we have in the early models for the 24256125 OS.
It's a series 2 VE commodore.
T43 has not been looked at, there has been five other GM controllers we've been working on.
I no longer monitor the forum, please either post your question or create a support ticket.
Hello! I try to make changes to these tables on E39, steps 1 and 3 I understand how to count. Please tell me how you calculated steps 2,4,5,6,7. I explained to ask because I'm afraid to make a mistake and go the wrong way. I really important is your answer!
Any body tried this with the new 8 speed transmissions ?
Will this still work the same way ?
EFILive Tuner
So, I'm having this very similar issue!
I'm wondering if anyone has figured out what was causing the issue?
I posted up in another thread:
https://forum.efilive.com/showthread...io-vs-RPM-quot
But I have a 2013 ZL1 doing the EXACT same thing. Just pulling TONS of timing out of the engine and causing some weird issue's when upshifting.
Anybody have any ideas? Where to look?
I've tried a couple of the things that were discussed in this thread, but I'm still having the issue.
I'm still mulling over your files in the other thread, but I do welcome any more info any anyone has to share
I've sent him an email with a tune from my own car's tcm. It still runs stock TM and shifts great and doesn't have the large timing swing.
It's a smooth shift on light/part throttle and firm/quick at wot. A lot of the fine tuning comes down to tuning the preset adapts and shift time modifiers.
So thread dig & mostly aimed at GMPX.
Has the torque calculation stuff for the trans been added in the V8 software.
if not, ETA on being able to see it.
Either way any chance of getting a copy of spreadsheet to play with, since we have been patiently waiting all these years. :-)
I've looked at my tune with HPT's "virtual torque" map and in typical fashion there shit doesn't work/calculate properly to what i log. lol
I no longer monitor the forum, please either post your question or create a support ticket.