Public release, March 29, 2012

Quote:

---

Originally Posted by bikealarmblair

I was trying to use V8 (I've not used it before ) but it opened V7

---

Right click the file and click Open with EFILive V8. Or open V8 S&T, click F2 Tune, then open the V7 file in there.

LLY full flash using V7.5 is doing the same thing, DO NOT USE V7.5 for full flashing LLY ECM's. Truck will not run. Have to use V8 to recover.

I'll check on the other ecms and see if the problem is there also.

Related: Flashing-problem-after-latest-update

Quote:

---

Originally Posted by Taz

The short answer - there seems to be an issue with builds 210 / 201 with respect to LS1-B PCMs.

Using builds 209 / 200 I selected a 512 Kb LS1-B PCM, a 1 Mb LS1-B PCM, an E38, and a T42 from the shelf and bench read each 3 times - BBR (V2), V7, and V8 - no issues presented.

I updated to builds 210 / 201 - and repeated the above tests - V7 would not read the LS1-B PCMs - displaying the same "Bootloader rejected" message that you received.

You should be able to read your LS1-B PCM with V8 or via BBR (V2).


Regards,
Taz

---

Builds 211 / 202 addressed the LS1-B issue that had presented itself with builds 210/ 201 - works great now.

Thanks to the EFILive Team for the very quick roll out of the patch / next build version of the software.


Regards,
Taz

Quote:

---

Originally Posted by Taz

Builds 211 / 202 addressed the LS1-B issue that had presented itself with builds 210/ 201 - works great now.

Thanks to the EFILive Team for the very quick roll out of the patch / next build version of the software.


Regards,
Taz

---

I agree, Paul/Ross you two are on top of it!