Public release, March 29, 2012

[ScarabEpic22]

I was trying to use V8 (I've not used it before ) but it opened V7

Right click the file and click Open with EFILive V8. Or open V8 S&T, click F2 Tune, then open the V7 file in there.

[IdahoRob]

LLY full flash using V7.5 is doing the same thing, DO NOT USE V7.5 for full flashing LLY ECM's. Truck will not run. Have to use V8 to recover.

[IdahoRob]

I'll check on the other ecms and see if the problem is there also.

[joecar]

Related: Flashing-problem-after-latest-update

[Taz]

The short answer - there seems to be an issue with builds 210 / 201 with respect to LS1-B PCMs.

Using builds 209 / 200 I selected a 512 Kb LS1-B PCM, a 1 Mb LS1-B PCM, an E38, and a T42 from the shelf and bench read each 3 times - BBR (V2), V7, and V8 - no issues presented.

I updated to builds 210 / 201 - and repeated the above tests - V7 would not read the LS1-B PCMs - displaying the same "Bootloader rejected" message that you received.

You should be able to read your LS1-B PCM with V8 or via BBR (V2).


Regards,
Taz

Builds 211 / 202 addressed the LS1-B issue that had presented itself with builds 210/ 201 - works great now.

Thanks to the EFILive Team for the very quick roll out of the patch / next build version of the software.


Regards,
Taz

[ScarabEpic22]

Builds 211 / 202 addressed the LS1-B issue that had presented itself with builds 210/ 201 - works great now.

Thanks to the EFILive Team for the very quick roll out of the patch / next build version of the software.


Regards,
Taz

I agree, Paul/Ross you two are on top of it!