Update: Jun 16, 2014

[Blacky]

The June 2014 public pre-release software is now available.

Please download and install both the V7.5 and V8 software packages.

Download V7.5 Software (92 MB)
Download V8 Software (45 MB) Updated (June 18, 2014) - please re-download and re-install the V8 software.

Release Notes:

Release Notes.

The FlashScan/AutoCal V2 firmware has been updated, the version number has been increased to V2.07.61, and the firmware date has been updated to June 16, 2014. You must update the firmware in your FlashScan and AutoCal device to V2.07.61 to maintain compatibility with the V7.5 software.

IMPORTANT: The *.ctz and *.coz tune file formats have been updated. All existing *.ctz and *.coz files will continue to operate with the V7.5 and V8 software and with the FlashScan and AutoCal firmware. All new *.ctz and *.coz tune files that are saved using the following software or firmware versions: V7.5.7.259, V8.2.2.252, V2.07.61 (or later versions) will no longer be compatible with older software or firmware versions.
That means if you are using this latest software version, then any tune files that you save may only be shared with other EFILive users who are using this latest (or a later) version of the software and/or firmware. For tuners that means making sure your customers' software matches the software and firmware version that you are using.

Fixed Issues:

1. Deleting calculated PIDs no longer causes an application crash when loading log files that reference those deleted PIDs.
   
2. E69 tune files no longer report errors when being opened in the V8 software.
   
3. Some LML table descriptions have been corrected.
   
4. In the V8 Scan Tool, changes to the order of all PIDs and deletions of calculated PIDs in log files are now saved back into the log file when the log file is saved.
   
5. The error message "Tune file is not compatible with current software version." has been fixed.

Known Issues:

Please post issues, questions, clarifications (large or small) in this thread.

As issues are reported and confirmed they will be re-posted as "Known Issues" below.

Version Numbers:

After installing the latest release you should have the following software, boot block, firmware versions installed:

EFILive V7 software: V7.5.7 Build 259
To view the installed version, select Help->About (in the V7 Scan or Tune software).

EFILive V8 software: V8.2.2 Build 252
To view the installed version, select Help->About (in the V8 Scan and Tune software).

Boot Block: V2.07.07 (Feb 07, 2014)
To view/update the Boot Block, Click the [Check Firmware] button in the V8 Scan and Tune software.

Firmware: V2.07.61 (Jun 16, 2014)
To view/update the Boot Block, Click the [Check Firmware] button in the V8 Scan and Tune software.

Regards
The EFILive Development Team