Update: Jul 04, 2014

[Blacky]

This update has been released to correct the known issues listed here

Please download and install both the V7.5 and V8 software packages.
If you have already installed the June 21, 2014 software from our main web site downloads page, you can auto-update to this version using the "Check for Updates" option. You must perform both V7.5 and V8 "Check For Updates" options.

Download V7.5 Software (94 MB)
Download V8 Software (46 MB)

Release Notes:

Release Notes.

The FlashScan/AutoCal V2 firmware has been updated, the version number has been increased to V2.07.63, and the firmware date has been updated to July 02, 2014.

IMPORTANT: The *.ctz and *.coz tune file formats have been updated. All existing *.ctz and *.coz files will continue to operate with the V7.5 and V8 software and with the FlashScan and AutoCal firmware. All new *.ctz and *.coz tune files that are saved using the following software or firmware versions: V7.5.7.259, V8.2.2.252, V2.07.61 (or later versions) will no longer be compatible with older software or firmware versions.
That means if you are using this latest software version, then any tune files that you save may only be shared with other EFILive users who are using this latest (or a later) version of the software and/or firmware. For tuners that means making sure your customers' software matches the software and firmware version that you are using.

Fixed Issues:

1. E86 calibration updates.
   
2. *.coz files can now be added to BBX Quick Setup files.
   
3. E69 BBL now logs data.
   
4. Added cylinder knock PIDs for E55.
   
5. Loading a BBX "Quick Setup" *.bbx file sometimes caused an Access Violation" error.
   
6. Changing any DTC from Inactive to Active in LML tunes caused a "Range Error" (LML DTCs are only available on non-USA installations only).
   
7. BBX "Quick Setup" was not copying tune files correctly to AutoCal.
   
8. Fixed faulty calibration definitions for E38 OS 12618277.

Added Features:

1. A new file browse option to help make it easier to find tune files, is available here: [F8: Tools]->[F2: Search]->[Browse].
   
2. A new option exists to allow tuners to hide the "Switch Tunes" menu item on AutoCal's "simple Menu" structure. [F6: Devices]->[F7: BBX]->"Black Box Options:"
   
3. A new check has been added when flashing CMB files to prevent accidentally flashing CMB (5.9) files into CMC (6.7) trucks.
   
4. The tune file history display now captures the software version and the calibration definition file version used to edit the tune file.

Known Issues:

Please search for existing known issues here:

https://forum.efilive.com/showthread...999#post207999

Please post new issues, questions or clarifications (large or small) in this thread.
As new issues are verified they will be posted in the "known issues" thread above.

Version Numbers:

After installing the latest release you should have the following software, boot block, firmware versions installed:

EFILive V7 software: V7.5.7 Build 261
To view the installed version, select Help->About (in the V7 Scan or Tune software).

EFILive V8 software: V8.2.2 Build 254
To view the installed version, select Help->About (in the V8 Scan and Tune software).

Boot Block: V2.07.07 (Feb 07, 2014)
To view/update the Boot Block, Click the [Check Firmware] button in the V8 Scan and Tune software.

Firmware: V2.07.63 (Jul 02, 2014)
To view/update the Boot Block, Click the [Check Firmware] button in the V8 Scan and Tune software.

Regards
The EFILive Development Team