How do you see so many frames in the log . I can only see like 100 frames when i log...how do you squish them?
What idle speed should I shoot for on a stock cam?
Reason I ask is the closer I get to 550rpm using B1652 to reduce idle speed the rougher is seems to idle.
I zeroed 1845 and 1843
63 g/s in b1829
First start after idle trim reset ....runaway idle to 1000rpm
Used 1852 to bring idle down started with 1.1 went down to .75 still 630rpm
Ran best at .8 702rpm
It's too much rpm tho I think 702 it's a stock cam...
Should I zero 5130 my timing is fluctuating between 3and9 degrees...
Should I command more base spark b1504

How do I know if I need to add or subtract from 1652 if my spark advance is lower than what is commanded in b5104

Or just change b 1821 to a higher rpm and hope that 5128 5129 5130 5131 don't disrupt timing while trying to dial the idle air mix in?