View Full Version : Duramax LB7
- DSPS5 config files
- cant get the smoke tune to work.
- Help! Sputtering/Cutting Out
- Cant pull tunes off my ecm Help!
- Lb7 dsp5 defuel problem help?
- lost pids
- List of DIC for 04 LB7 CALI
- lb7 dies after dsp-5 flash
- Issue using V2 to switch tunes
- Hard Downshift, lb7 dsp 5
- No response from ECM
- bootloader error
- Valet mode
- Tunes won't load
- cant connect to ecm
- Trying to track down a little rattle
- Smokey Tunes
- will I need to buy licenses
- swapping ECM's, compatability
- Screwy Problem From Tuning LB7
- New to EFI..Hello
- defuel tables
- Sensor removal?
- Locked ecm wont let in
- Dealer can't reflash over a locked ECM
- High rail pressure at idle
- MAF Timing LB7
- Convert mm3/stroke to mm3/second
- data logging
- locked comp
- locked comp
- Help "No Data Received" error
- "No Data Received" error
- Help with DSP5
- TLIQ vs BT vs TLIQ or some such thing
- LB7 EFI LIVE with no real results
- Rattle??
- Cannot Erase the ECM
- Truck feels fast for a little while then...................
- New guy here needs some help with EFI live and my LB7
- Lift pump and injection pump NEED HELP
- Anybody got an LB7 ECM for sale
- What does serial V2 switching of tunes equal to in what position.
- OS 15166853 DSP5 Tune Crashes ECM (Video Included) RC9's fault?
- 2001 Drivder message Center
- Trying To Flash My LB7
- Is it possible my Flash scanner is my issue?
- LB7 smoke tune
- A/C problem?
- LB7 Lope Tune
- ECM Reflash Gone Horribly Wrong - Advice Please - 2004 LB7
- 2004 LB7 no communication with the ECM
- Tachometer calibration
- 2002 LB7 over-rev in 4th gear
- LB7 Balance Rates all reading 0
- Ca smog, reduce smoke temp. Tune?
- 02 LB7 No Start
- Newbie looking for direction
- 02 LB7 balance rate PID's gone from list?
- Bench harness question
- tune pulling fuel
- DSP5 staging question
- new to the efilive world 02 lb7
- 2002 LB7 Erratic Shifting & Defuel
- wanting to learn
- LBZ Fuel Pressure Reg. on LB7
- LBZ Fuel Pressure Regulator on LB7
- What to change and how to change
- DSP5 Tuning Problems
- Dual CP3's
- Fuel Rail Pressure Issues
- DSP5 Tune Loading Issues with New EFI Update
- LB7 unable to load tune.
- Trans Tunes
- HELP.02 lb7 no start after converting to dsp5
- CP3 or Injectors????
- tunning for bigger injectors
- Tips For Big Tunes
- Tuning Big Injectors
- just a little confused
- loss of MPGs after valve adjustment???
- 251 cycles
- Sluggish Truck
- Code p0802 after flash
- 2002 LB7 - DSP PID, not valid?
- 03 dsp5 problem
- table smoothing
- Need Help, '03 Won't Start
- rpms
- Boot loader rejected, custom key?
- 01 upgrading OS
- truck wont start, controller in an unknown state.
- Trying to load tunes with autocal and not sure how to do it!?
- New To efi live, having trouble getting started.
- odometer calibration
- High speed flashing problems
- Invalid serial number
- having trouble with scan tool
- edge cts /cs
- hesitate at higher speeds??
- Locked PCM?
- Full flash only loses serial number
- newbie here flashing question
- lb7 boot loader rejected
- 04 LB7 won't full flash and $0537 error code
- A Little Direction
- New to Duramaxs
- Flashscan generated ECM lock issue....
- Fuel temp sensor table
- Couple Duramax Log Questions
- Shorted injectors
- '01 LB7 Check Engine Light Comes on While Switching DSP
- $0333 error
- where can i get a tune from in ny
- copying stock tune to send to duramaxtuner.com
- How to compensate for larger injectors?
- Do I have a fried ECM??
- Difference between 2002 & 2004 LB7 tune?
- New PCM, A/C won't work and it's 104!
- $033 code v2 lb7
- DSP5 is acting weird - ADVICE PLEASE
- $0534 pleas help
- Cant get CTS insight to work after changing from 2001 O.S. to a 2002 O.S.
- 2002 lb7 dlc connector
- licensed controller says it not??
- no start.no ecm
- Stand Alone Wiring Harness
- I need an 01 3500 cab and chassis tune file
- why can't I get my speedometer accurate?
- flashscan tool
- Have I bricked my LB7 ECM?
- Lb7 eprom ab28f400b5
- 01 LB7 PCM in 04 LB7 truck?
- Single tune fine DSP5 engine stalls
- 03 LB7 not recognizing license.
- 2003 Duramax -
- how can I change the vin in my lb7 PCM?
- Testing the fpr
- Just a lot of problems with starting my tuning..
- dsp5 not switching
- $0534 Unable to unlock previously autolocked LB7
- DSP output not working properly
- Code $0537: Controller is locked with a custom key
- ECM Connection problem
- Serial number
- swap questioin regarding ecm bcm communication
- Windows 8 not allowing full flash
- OS# 15063376 01 duramax issues
- ECM Locked
- LB7 with standalone 4L80
- EFI Live question
- Help with retreving Stock tune
- Tuning Assistance
- 03 will not crank
- Clean Stock LB7 OS
- LB7 no balance rate pdi and other pdi available after update
- FNG to EFI Live
- Duramax With Edge Insight
- 01 lb7 dmax..... cant pass 480 rwhp on the dyno.
- well another locked ecm.
- Ecm fried???
- EFI live lb7 tuning help PLZ!
- Feature request, custom control over fuel transfer pump relay
- Needing 9044 manual stock file please
- Pilot timing tables don't change in DSP files
- 03 O.S. in 02 idle then shut off
- dsp5 tunes. but does pilot need to be adjusted.
- Script exited with code $0101: No data received
- Removing Pilot Injection
- Need help with loping idle
- ecm controller not available, ( $0281 ) code during ecm read
- No reply in DVT
- load tunes on dsp5
- Error: $0537
- Ecm won't unlock after tune
- creating a tune for remote flashing that unlocks an e54 with a stock os
- 2001 LB7 Error: $0537
- LB7 Cab and Chassis Stock file
- 01 lb7 serial number changed...details inside
- scanning assistance
- dsp5 tune being limited and confused why
- Security light
- cuts out in upper rpm and from 65-105 mph for a few seconds?
- Bricked LB7 ecm
- Need help!
- $0537 lb7
- HP Tuners and Custom OS?
- Help needed!!!!!!! Aspa truck shutting off whil driving
- New to the game, any advise?
- Defuel and idle
- locked comp
- max safe boost for ihi turbo
- Cts wont recognize my dsp5 tune OS
- lb7 / 4l80
- License not active
- How to get maximum MPGs?
- 02 LB7 $0537 flash issue
- 02 LB7 $0537 flash issue
- looking for stock lb7 zf6 file
- U1000 Codes After Tuning
- LB7 Speed Limiter/ High speed defuel???
- newbie here, need help with smoke
- Lb7 help e54
- Another Bad ECM?
- Defuel Help
- E54 Issues Again
- Bag of parts........
- Lb7 timing tables
- Another e54 question
- Two 01/02 LB7 Cores
- LB7 ECM repair, AB28F400B5
- Injector Stuck????
- Can only get 90mm3 of fuel, what's wrong?
- using CTS2 with GDP
- LB7 and 30 over injectors
- What am I doing wrong here? I have really harsh defueling!
- difference in DTC enablers?
- LB7 Hummer H2 Swap
- Truck Won't Start
- Lb7 2002 won't load tune
- Bastardized lb7
- LB7 20 over injector help
- Lost my efi tunes when replacing an injector.
- LB7 to LLY Head and Injector Swap
- Code
- 02 lb7 wont run
- Trouble after DSP5 upgrade
- lb7 auto cal issues
- lb7 ecm tuning trouble
- How do I remove EFI live from my truck? Please help!!!
- Completely new to tuning.
- LB7 DSP switch issue
- A2000 / 2400 file request
- Do you have a good lb7 dsp5 tune ??
- Loading efi. Error $0537
- Efilive aborted at beginning of flash
- I want to start tuning my own truck without taking it to a shop!! What do i need?
- can someone go over my dsp5 tune
- LB7 $0544 when attempting to activate license
- 2001 LB7 says locked with key While trying to tune ecm
- LB7, E54 ECM will not store serial and VIN number.
- Unlock script>>>>bricked ecms
- LB7 PID question
- Vats issue
- LB7 code $0333
- 04 duramax with running efi live presently. possibly changing tcm.
- LB7 Locked ECM
- Lb7
- MAF rescaling help
- another LB7 locked ECM
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.